TRX250R.ORG

Workshop => Engine and Bottom End => Topic started by: Justin4141 on February 08, 2024, 02:57:21 PM

Title: LSR Chassis w/ CR250 ignition + wiring harness pictures ?
Post by: Justin4141 on February 08, 2024, 02:57:21 PM

Does anyone have pictures of how they ran there wiring harness with a 01 Cr 250 ignition on a Lonestar chassis ? Looking to clean mine up an need ideas !

Title: Re: LSR Chassis w/ CR250 ignition + wiring harness pictures ?
Post by: croat1 on February 09, 2024, 06:49:18 AM

I don’t have a Lonestar but I’ll post a CR ignition being used with a Laeger. 

I’ll get pics later today.

Joe

Title: Re: LSR Chassis w/ CR250 ignition + wiring harness pictures ?
Post by: croat1 on February 10, 2024, 02:50:09 PM

Starting with a CR kill switch.

Title: Re: LSR Chassis w/ CR250 ignition + wiring harness pictures ?
Post by: croat1 on February 10, 2024, 02:53:53 PM

Pumashine round tube coil mount.  CR cdi mounted where a trx coil would go using the CR rubber cushion.

Title: Re: LSR Chassis w/ CR250 ignition + wiring harness pictures ?
Post by: croat1 on February 18, 2024, 07:21:03 PM

Sharing that this harness is also available….

https://www.southtexasbanshee.com/product-page/trx-250r-cr250-ignition-harness

Title: Re: LSR Chassis w/ CR250 ignition + wiring harness pictures ?
Post by: atvmxr on February 22, 2024, 09:40:26 AM

I thought the pumashine coil mounts were discontinued?  Mine is a hot mess, held in place with zip ties.  coil where stock one is, cdi where stock one is.  but its made it through several MX and arenacross races. 

I need to install my zeel anyway

Title: Re: LSR Chassis w/ CR250 ignition + wiring harness pictures ?
Post by: Langbolt on February 23, 2024, 09:57:37 AM

Quote from: atvmxr on February 22, 2024, 09:40:26 AM

I thought the pumashine coil mounts were discontinued?  Mine is a hot mess, held in place with zip ties.  coil where stock one is, cdi where stock one is.  but its made it through several MX and arenacross races. 

I need to install my zeel anyway

If you can find an ESR coil moint they work great! I used mine along with a couple handlebar clamps to get it to mount up to the round tube of my LAEGER.

Title: Re: LSR Chassis w/ CR250 ignition + wiring harness pictures ?
Post by: atvmxr on February 23, 2024, 01:09:57 PM

can you snap a pic of how your rear shocl reservoir and hose is routed?   My LSR has a little cross brace by the front seat mount and its right in the way of my hose.  at least the way I think its supposed to be routed

Title: Re: LSR Chassis w/ CR250 ignition + wiring harness pictures ?
Post by: havinnoj on February 27, 2024, 12:26:48 PM

Quote from: Langbolt on February 23, 2024, 09:57:37 AM

Quote from: atvmxr on February 22, 2024, 09:40:26 AM

I thought the pumashine coil mounts were discontinued?  Mine is a hot mess, held in place with zip ties.  coil where stock one is, cdi where stock one is.  but its made it through several MX and arenacross races. 

I need to install my zeel anyway

If you can find an ESR coil moint they work great! I used mine along with a couple handlebar clamps to get it to mount up to the round tube of my LAEGER.

Clever using the handlebar mount, I used to drill those ESR mounts and use a "u" bolt with threads to clear the round tube.