TRX250R.ORG
Workshop => The Mad Scientist => Topic started by: croat1 on June 14, 2024, 08:08:37 AM
-
@SFricia
New rear seat latch from Sonny
-
This is cool. Saves me from making my own since I never find time to finish making the knobs. Here’s what I was going to do using a HSS form tool and radius mill. I ground the form tools years ago for other parts.
-
Who’s made their own form tools before?
-
I still grind my own custom tools for the manual lathe.
-
The latch looks awesome Sonny!
Joe, I grind my own tooling quite often. I prefer using Hss over carbide on aluminum and plastics. A little radius on the hss tool gives a nice finish. Of course you machinist fellas already know that stuff. I’m just a lowly knuckle dragging millwright lol.
Loren
-
High speed still has a place. Not generally in my shop, but there is still a place for it :)
-
you got a website or where can I buy?
-
Most just message me on Facebook (Sonny Fricia). I am in some of the TRX rider groups.
You can also email me as well, but no site yet. Too many projects and I just haven't had a chance to get around to building a site.
I try to be respectful of the forum rules, so I don't plug my parts or sell on here.
-
Most just message me on Facebook (Sonny Fricia). I am in some of the TRX rider groups.
You can also email me as well, but no site yet. Too many projects and I just haven't had a chance to get around to building a site.
I try to be respectful of the forum rules, so I don't plug my parts or sell on here.
@SFricia
Sonny, thanks as always for the parts you make. Also, thanks for respecting the forum rules.
Joe
-
Finished seat latch.