TRX250R.ORG

Workshop => Suspension and Chassis => Topic started by: JoePA on June 02, 2025, 12:04:44 PM

Title: Andy from maul tech 450R swingarm linkage for the 250R
Post by: JoePA on June 02, 2025, 12:04:44 PM

Does anyone remember when Andy was messing around with making the 450r swingarm work on the 250R? He got as far as making the linkage but it needed a custom built shock to work properly. I'm trying to find those posts and reach out to Drew at maul tech and see if he can still make up a set.

Title: Re: Andy from maul tech 450R swingarm linkage for the 250R
Post by: croat1 on June 02, 2025, 06:16:16 PM

It’s been mentioned here on org.  Do a search for Maul

Maybe go back on ATV Riders??? It’s been a long time but maybe some information still exists there.

Joe

Title: Re: Andy from maul tech 450R swingarm linkage for the 250R
Post by: JoePA on June 03, 2025, 12:30:39 PM

Thank you! I did some research but also reached out to Drew that currently owns maul Tech and he's not sure where that info went. He was the key in making this all happen so kind of dead in the water but there is at least one linkage and shock made for that setup somewhere in the 250R world.

Title: Re: Andy from maul tech 450R swingarm linkage for the 250R
Post by: Hawaiiysr on July 29, 2025, 02:34:27 AM

That unfortunate.
I recently bought a R with all 450r swingarm set up. Im not sure what linkage was used.