TRX250R.ORG

Workshop => The Mad Scientist => Topic started by: croat1 on November 21, 2025, 08:03:51 PM

Title: DMR float bowl
Post by: croat1 on November 21, 2025, 08:03:51 PM

Check this out

Title: Re: DMR float bowl
Post by: The norm on November 23, 2025, 07:31:25 PM

What is the story behind this float bowl? Is it just a cool billet part or????

Title: Re: DMR float bowl
Post by: Langbolt on November 24, 2025, 07:15:21 AM

They relocate the Pilot Jet & Main Jet....so they can be replaced without removing the carburetor.

DMR incorporated thumb screws so the only tools required are a screwdriver to remove the pilot jet and a 6mm nut driver to remove the main jet.

It's a real game changer!

:)

Title: Re: DMR float bowl
Post by: broken1 on November 25, 2025, 11:51:50 AM

The main jet can already be replaced without removing the carb or the float bowl but being able to swap pilots without removing the bowl is a nice feature.

Title: Re: DMR float bowl
Post by: Jerry Hall on November 25, 2025, 07:58:43 PM

-Where are the holes located in the float bowl that feed the pilot and main jets their fuel?

Title: Re: DMR float bowl
Post by: croat1 on November 25, 2025, 09:11:12 PM

A video of the float bowl

https://youtu.be/Fgr4HWmv4Zw