TRX250r.org

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Topics - spiritaces

Pages: [1]
1
For Sale - Parts / ESR 310
« on: June 29, 2018, 04:49:14 PM »
ESR 310 PV cylinder. Comes with piston, spacer plate for long rod, orings, wrist pin and bearing. Also has a billet flange (not pictured) and a boyesen rad valve. Race gas dome. Nice set up ran good. 520 shipped

2
For Sale - Parts / Roll arms
« on: June 29, 2018, 04:46:22 PM »
Roll design LT +3 arms. The ball joints feel alright. The Garlock bushings are a little loose. Either you can replace them or my friend told me that Roll will knurl them. Either way I donít wanna mess with them. Uppers are chrome. They have a few blemishes in the chrome but nothing major. The brake line clamp is stuck to them cuz the little Allen was stripped, so I just cut the line to remove them. Again donít wanna mess with it. Need powder on bottom. Comes with tie rods. 800 shipped to the lower 48

3
For Sale - Parts / brakes
« on: January 20, 2018, 09:26:58 PM »
a couple brake setups

1) Arizona brakes. Nice and clean

Front brakes with calipers, master and line. 120 shipped. Great working condition.

Both for 230 shipped


2) These brakes different from the ones I posted earlier.

Rear caliper and master cylinder. No line. Decent shape but could use some new rubbers.

Front brakes with calipers, master cylinder (450) and lines.

Selling all together for 175 shipped

4
For Sale - Parts / Lsr arms
« on: January 05, 2018, 07:44:04 PM »
LSR arms. I think theyíre stock length but not sure. Bottom arm measured 13 inches. Donít look very wide if anything maybe a +1 but I donít know stock length to confirm. Ball joints look nice. Come with tie rods and ends. 250 shipped

5
Suspension and Chassis / OEM arm identification
« on: February 14, 2016, 03:49:22 AM »
How can i tell what year oem a arms I have? What were the differences

6
Suspension and Chassis / Stock arm bushings
« on: February 11, 2016, 07:15:33 PM »
Isn't there a bushin kit that replaces the bearings in stock arms? Just seeing if anyone knows what I'm talking about

7
Suspension and Chassis / Replace ball joints on oem arms
« on: February 10, 2016, 05:49:33 PM »
I know it's been discussed before but can't find nothing. How do you replace the ball joints on oem arms. I'm pretty sure you can cut them off and replace with aftermarket replaceable joints. Any info would be appreciated

8
For Sale - Parts / 363 Sphinx
« on: January 31, 2016, 03:49:11 PM »
363 Sphinx for sale. Polished cylinder and polished side covers. Baldwin trans. Hinson basket oem clutch, race dome. Was ported by a local guy rdz. Runs great only about 8 hrs on it. Cases are mint. Powdered black. No ignition. 3500

9
For Sale - Parts / Some misc parts
« on: January 30, 2016, 12:33:53 PM »
Duncan chrome bumper good shape, not 100 perfect but pretty nice! 125

Nacs stem clamp black 60

88/89 rear bumper unsure of brand SOLD

Cr style head gasket for lowering compression 20

Asv brake dust covers (2) free with any purchase

Laegers 7/8 anti vibe clamp SOLD

Boyesen stator cover black new 100

Boyesen rad valve reeds new SOLD

Misc box of gears, ratchet pawl, kicker assembly 60

Clarke clear tank with all mounts and petcock doesn't leak 120

Ice tires mxr6 like new all 4. 18x10x8 rear and I believe 20x6x10 front but I'll double check the front  150

Counter balancer with new bearing 75

86 trans 200

88/89 clutch cover 50

Douglas rear beadlocks with like new mxr6 tires and polished front Douglas wheels with like new itp mxr6 as well 400




Sent from my iPhone using Tapatalk

10
For Sale - Parts / Parts lot
« on: January 07, 2016, 01:16:51 PM »
Selling complete parts lot. Just want the stuff gone.

Rebuilt counter balancer
Misc gears etc
88/89 clutch cover
Flywheel and stator plus cdi and wire harnesses
89 chrome spindles
Sprocket guard
Shift forks and shift drum
Exhaust manifolds

300 shipped




Sent from my iPhone using Tapatalk

11
For Sale - Parts / Ac nerfs
« on: December 26, 2015, 04:38:10 PM »
Ac nerf bars 17" center to center for 88/89. I don't have the mounts but I think they are like 30 from AC. Sold

Sent from my iPhone using Tapatalk

12
For Sale - Parts / Rebuilt CB
« on: December 22, 2015, 03:45:09 PM »
Rebuild by bubba with holder - 80


Sent from my iPhone using Tapatalk

13
For Sale - Parts / 86 trans
« on: December 22, 2015, 03:43:59 PM »
86 trans good shape - 225


Sent from my iPhone using Tapatalk

14
For Sale - Parts / Parts
« on: December 22, 2015, 03:34:44 PM »
89 chrome spindles, chrome decent shape comes with rock guards - 70

Stock sprocket guard - 30

Esr cr adapter plate - sold

Project 321 gas cap for Clark tank and 88/89 tanks - sold

2 Stock exhaust flange 20 each

Shift forks and shafts, forks look good - 50

Shift drum - 30

Misc engine parts, ratchet pawls, primary drive gears etc

Chrome motor mounts - sold

Stock stator and flywheel, flywheel looks great also comes with cdi and a couple wire harness - 150 for everything there

88/89 clutch cover, I stripped it then didn't do anything after - 50

85/87 clutch cover form low hour bike, was saving for a future project but whatever - sold

Laeger anti vibe mount 7/8 50










Sent from my iPhone using Tapatalk

15
Wanted / I would like a junk piece of oem plastic
« on: December 21, 2015, 11:48:30 PM »
Looking for a junk hood or a piece of broken plastic for a project. Red oem color is what i need

Pages: [1]