Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Topics - Action69

Pages: [1] 2
Wanted / Looking for a bottom end or complete motor
« on: July 28, 2020, 06:49:57 PM »
Hello everyone Iím looking for a complete bottom end or a complete motor ,it can be stock or built.this will be going in my lrd attitude frame..I have a cr ignition set up already for it..Iím ready to purchase the right deal..let me know what you guys have sitting around..thank you for looking..

Projects / LRD Attitude build
« on: July 09, 2020, 08:25:41 PM »

So this past weekend I came across an LRD attitude frame on FB marketplace, I reached out to the guy Friday night we spoke Saturday morning and he was leaving the next evening on a road trip from Massachusetts to South Carolina for a week.He had said he had a lot of bs calls and no one serious so I said look Iím for real letís do this Iíll give you a $300 deposit so you know Iím serious and not loading a frame into a Toyota camera leaving for a road scheduled to meet midway and I picked it up ..I was up in the air if I was going to do another  build because I had some nice spare parts laying around that I was going to sell or do a build,I chose the far my plans for it are possibly leaving the frame in the silver natural state itís in,I just ordered Kawasaki green full fender maiers,I have nos merril extreme LT a arms,axis front shocks,cr ignition,spare set of Oem white plastics.i just bought but havenít received a one of two prototype works performance no link swing arm from the 90ís.To keep it all in the family I picked up a works performance rear shock as well.A fellow member has lrd foot pegs that I will be purchasing shortly..Iím thinking of going with aftermarket hubs both front and rear.I also have some cool NPM parts such as radiator mounts,black anodized brake resivour and throttle cover.I have a stock seat that I will be having fourwerx recover for me,im thinking of adding LRD on sides of seat with attitude across the back and possibly using green&silver accents with a black thinking of running a cfm airbox if it will fit the not sure on what colors to do the a arms and swinger..Iím also thinking of getting an LRD pipe and silencer if I can find a nice clean one and if theyíre good performers..Iím open to any input or suggestions as well as open to buy parts..thanks for reading..Iíll post some pictures soon..

Lounge / Picked up a new toy
« on: June 27, 2020, 03:04:28 PM »
So I saw this 1980 z50 all original on FB market place does I went and scooped it up for my collection..

Wanted / Esr front motor mounts
« on: April 16, 2020, 03:56:03 PM »
Hello Iím looking for a set of esr front motor mounts (black preferably).I just checked his site and he only offers the head stay now

Projects / 1988 Trx resto/mod build
« on: April 15, 2020, 09:13:47 AM »
Hello everyone I figured Iíd share this build from the beginning.I just got my frame back from the powder coater along with my houser stem.Im going for a modified factory look,I have 88 oem plastic ,88 swing arm,88 brakes and I have a cherry 86 motor .Everything else will be aftermarket but following the oem color scheme.I have Paul turner 89 trxrace exhaust as well as a sparks TT pipe.I have a fourwerx carbon hood ,radiator shrouds and a carbon fiber intake and aluminum air box that was one of three prototypes currently made..I ordered a new special edition RTC radiator grill in black anodize..Iíll be running a set of JD performance +2+1 standard travel a arms in silver with axis front shocks and an ohlins rear shock.I will also be sending my seat out to fourwerx to get a new seat cover and possibly foam.There are other bits of bing from NPM,RTC and Sonny Fricia..I will be installing a LSR axle,anti fade and bearing carrie along with ITP C2 rims and havnt settles on tires yet..I will be using oem hardware where applicable..Iíll be running a PRM atv front bumper and skid plate with a Pro armor 450r grab bar in black..

Lounge / What powdercoat color is closest to 88 Oem red
« on: April 01, 2020, 09:06:20 AM »
Hello everyone as the title states Iím looking for suggestions on the closest powder coat color match to the 88 red,my last frame I had done was an 85 Atc 250r and I think it came out more orange similar to early 80ís cr.i sold off a lot of my stuff on Monday so Iím going to drop my 88 frame off and start a new project.I have mostly everything for the build so it should move you for any input and suggestions.

Lounge / Black Friday deals
« on: November 25, 2019, 06:23:24 PM »
Whatís up everyone itís that time of year again and I figured we should start a thread and share whatever Black Friday deals we know of.Im always in the market for a good deal and who doesnít like saving money.So far Iíve seen fasst flex is giving 20% off all of there merchandise.I hope everyone has a safe and happy thanksgiving..

Body and Controls / DIY How to refinish plastic
« on: November 21, 2019, 06:53:04 PM »
I just posted these instructions up on an mx forum and I figured it would be useful info to share here.I had a tank professionally redone and he sent these instructions back with it..

Lounge / 2001 CR250 piston replacement suggestions
« on: September 09, 2019, 09:02:48 AM »
Hello as the title states I need to swap out the piston on my 01 cr,I just noticed a crack about 1/2 inch long on the skirt thru the exhaust port.I havenít pulled the cylinder yet to see if itís scored.The bike ran but I bought it in need of some love and havenít ridden it.Ive read mixed opinions about replacing with an Oem piston ,some like wiseco better because itís forged instead of cast.Anyone have any opinions on this?thanks..

Lounge / Billet radiator mounts
« on: November 28, 2018, 11:56:38 AM »
Hey guys I just came across these last night.I ordered 3 sets.They charged $45 per set I thought they looked pretty trick and figured Iíd share.They also had made some pretty cool R stuff in the past but only had these left in stock.Hopefully theyíll make some of their items again.

Hello all I purchased this complete exhaust used and Iím wondering if Iím missing anything?im test fitting it and it doesnít line up too well.Im also wondering if Iím missing any mounts.It has one on the silencer,one on the expansion chamber that is way off from the head stay mounting hole and one hook for a spring closest to cylinder.This is also an adjustable head pipe so Iím concerned how it will line up once I start messing with the length.any input would be much appreciated..Also can anyone identify which pipe this is?I bought it a while back and canít remember this way if I call Arlen i properly identify what Iím working with..Thank you..

Hello everyone Iím selling this complete running motor package that I was going to put in an aluminum framed cr250r.This is a plug and play package it has no case saver damage,it does look  like itís had a drain plug repair.The only reason Iím selling is the guy I bought the motor from offered me a great deal on his service Honda conversion.$2000 plus shipping.

Suspension and Chassis / Tie rod end recommendations
« on: September 18, 2018, 09:06:42 PM »
Hello all Iím looking for a recommendation on some good tie rod ends.These will be used on a Gibson long travel front end set up.any guidance would be greatly appreciated..also what size lower shock bolt should I be using?the Oem bolt is too wide in diameter.also what are people doing to make up for the space in the shock mount when using a smalle4 diameter than Oem bolt?

Lounge / Custom graphics company..
« on: September 16, 2018, 03:22:21 PM »
Hello everyone I was  wondering if anyone had a recommendation for a company that makes custom graphic kits.Im looking to get a set made for my 01 cr250r,it seems most places have for the 02-07..thanks for any direction on this..

Wanted / WTB:TRX450r rear rim
« on: April 02, 2018, 05:50:06 PM »
Hello Iím looking for a rear rim for Trx450r or 88/89 Trx250r thanks for looking..

Pages: [1] 2