TRX250r.org

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Topics - havinnoj

Pages: [1] 2 3 ... 8
1
Wanted / WTB: Nice OEM Hood
« on: December 03, 2018, 03:23:05 PM »
Looking for nice condition OEM hood, no busted mounting tabs or anything. 

2
Lounge / Site Stickers v2
« on: November 15, 2018, 01:23:57 PM »
Hi guys - starting a new thread to keep things easier to follow. 

1.  We will still offer the "TRX250R.ORG" stickers
2.  For those that want a different design, working on the oval option.  The ATV silhouette needs to be updated, but anything else jumping out at you?

3
Engine and Bottom End / 363 370 Vibration
« on: November 05, 2018, 11:54:23 PM »
Fellas running 363/ 370cc motors with unbalanced cranks, what's the vibration like?  I can't remember back to the last 350 I had and am considering doing a 363 Sphynx for the spare duner over the winter.  I probably wouldn't care for myself but usually have a gal riding that bike so vibration becomes a bit more of a concern.  Probably won't go that route if I need to spend the extra coin to balance since that motor size is already getting big enough for the spare.

4
Carburetor, Intake, and Exhaust / EGT Mounting
« on: September 10, 2018, 06:42:55 PM »
Anybody run an EGT?  Looking to potentially add one to the drag bike and want to see pics of mounting & routing if anyone has them.

5
Lounge / Site Stickers?
« on: September 04, 2018, 09:34:41 PM »
Someone inquired about site stickers.  Who's interested?  We made some up a while back but want to get member feedback on size and type they'd prefer.

6
Lounge / Snap Ring Pliers
« on: August 31, 2018, 01:36:47 PM »
Guys - what are you using for snap ring pliers?  The Proto ones I have are just barely up to the task (would like bigger tips and the overall "stretch" is just about maxed-out to get the brake stay snap ring on-and off). 

7
Body and Controls / Fourwerx Carbon Fiber Radiator Shroud Mounting
« on: August 07, 2018, 05:01:27 PM »
So FWC doesn't include mounting hardware with their carbon shrouds.  Anybody running a set?  And if so, how are you mounting them?  Can I rob an OMF set of the shoulder bushing and bolt?  Do I need the rubber grommet?  Kind of frustrated they aren't "ready to install" out of the box or I'd have pulled the trigger.

8
Carburetor, Intake, and Exhaust / Exhaust Stinger Temps
« on: August 06, 2018, 10:22:44 PM »
Guys - need replacement hose for the pipe to stinger joint.  The high temp eBay stuff is rated to 500*F.  I know EGT’s will obviously be hotter but not sure how hot that joint actually gets.  So is a 500*F rating sufficient or do
I need more?

9
Carburetor, Intake, and Exhaust / Exhaust Hangers - Who?
« on: August 01, 2018, 02:08:11 PM »
Who's doing the best exhaust hangers these days?  @Pumashine?  NPM?  Any others to consider?  How do these compare to stock? 

10
Wanted / WTB: Hardkor Front Hubs Red
« on: June 04, 2018, 02:25:27 PM »
Looking for a nice set of Hardkor front hubs.  Mainly interested in red. May consider other colors.

11
Wanted / WTB: OEM rear plastics, white
« on: May 22, 2018, 02:33:04 PM »
Looking for good condition rear plastics, white. No spiderwebbing.  Thanks

12
Wanted / WTB: 89 Seat Pan
« on: May 21, 2018, 12:34:04 PM »
Looking for a nice clean 89 seat pan.  Don't care about cover and foam as much.

13
Wanted / WTB: Red Merrell Waterpump Cover
« on: May 14, 2018, 08:01:55 PM »
Let me know what ya got  8)

14
Wanted / WTB: ESR Parking Brake Blockoff
« on: May 02, 2018, 08:40:28 PM »
Looking for an ESR blockoff..

15
Suspension and Chassis / Chain Sliders, Rollers, Rub Blocks
« on: April 16, 2018, 11:37:45 PM »
Never really though too much about these - usually grabbed UPP stuff and has worked well in the sand.  Have a couple TM swingarm sliders - also nice.  What’s everyone prefer for sliders, rollers, and that little rub block/slider?

Pages: [1] 2 3 ... 8