TRX250r.org

Author Topic: KTM temperature and elevation corection chart  (Read 2784 times)

Offline rsss396

KTM temperature and elevation corection chart
« on: September 19, 2013, 11:07:38 PM »
Anyone looking for a great builder I highly recommend the following.
For CP products dealers I would recommend:
Arlan at LED(site sponsor), Pete Schemberger at Hybrid Engineering, Mat Shearer at Shearer Custom Pipes, Dennis Packard at Packard Racing, and Nate McCoy of McCoys Peformance.

Other great builders I also would recommend: Neil Prichard, Jerry Hall, Bubba Ramsey and James Dodge.

Offline atvmxr

KTM temperature and elevation corection chart
« Reply #1 on: September 20, 2013, 10:07:13 AM »
interesting!   doesnt humidity come into play as well?  (maybe figured into elevation, as in general, the higher elevation the humdity goes down - usually)

so 165 main and 45 pilot at sea level and 90 degrees. (.98) on graph.  If I were to go to waynoka at ~2000ft (.95), then (.95/.98) * 165 = 159.95 = 160 main?  

is that right?
Bunch of race quads that run on premix

Offline rsss396

KTM temperature and elevation corection chart
« Reply #2 on: September 20, 2013, 11:46:39 AM »
I would say yes you are correct, another way to do the math would be .98 -.95 + .03 x 165 =   4.95 - 165 = 160 main

I am sure humidity should be factored in also along with atmospheric pressure also but the calculator would be much more complicated
« Last Edit: September 20, 2013, 04:47:29 PM by rsss396 »
Anyone looking for a great builder I highly recommend the following.
For CP products dealers I would recommend:
Arlan at LED(site sponsor), Pete Schemberger at Hybrid Engineering, Mat Shearer at Shearer Custom Pipes, Dennis Packard at Packard Racing, and Nate McCoy of McCoys Peformance.

Other great builders I also would recommend: Neil Prichard, Jerry Hall, Bubba Ramsey and James Dodge.

 

Sitemap 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38