Author Topic: top engine mount (Read 2020 times)

j@y · « **on:** October 11, 2014, 01:11:16 PM »

Looking for a top engine mount for the head or I might have to go the ESR route.

Mickkey82984 · « **Reply #1 on:** October 11, 2014, 01:31:48 PM »

I have one for a 86 frame, it could use paint or powder but you pay shipping and it's yours. I don't use a head stay on my bike.

j@y · « **Reply #2 on:** October 11, 2014, 02:06:57 PM »

Hey thanks mickkey! Do you know if it'll fit a 88/89 frame or are they all the same?

Mickkey82984 · « **Reply #3 on:** October 11, 2014, 02:11:51 PM »

No problem, I'm not sure I think they are the same but I'm not 100% sure, maybe try asking on the forum. I'd hate to send it and it not fit.

j@y · « **Reply #4 on:** October 11, 2014, 02:50:51 PM »

I found one off an 88 with front mounts and fresh powder but thanks again anyhow.

sgb318 · « **Reply #5 on:** October 11, 2014, 04:13:41 PM »

Are you running a spacer plate? If so a stock one won't work

j@y · « **Reply #6 on:** October 11, 2014, 04:52:02 PM »

Darnit! Yes and no. I'll be running esr cases with the deck height for longrod so pretty much the same thing.

Pumashine · « **Reply #7 on:** October 11, 2014, 05:54:27 PM »

All years are the same. You should be able to slot the holes with a file and get it mounted up. Otherwise some use a smaller bolt to make it through the holes.

sgb318 · « **Reply #8 on:** October 11, 2014, 05:56:17 PM »

Esr head should be slotted I think

j@y · « **Reply #9 on:** October 11, 2014, 09:21:34 PM »

Cool thanks puma. I think it is sgb318 I'll have to check when I get home