Author Topic: 450r hubs and brakes on 250r arms, possible? (Read 3227 times)

96bansheepilot · « **on:** January 02, 2015, 10:23:32 AM »

Is is possible to bolt 04-05 450r spindles, hubs and brakes on a 250r chassis w lonestar rec/play a arms?

would the ball joints fit into the hubs? Any machining needed? Anyone done this?
thx!

rk88r · « **Reply #1 on:** January 05, 2015, 07:55:19 PM »

Yes, on some Hermann arms anyway.

trx250scar · « **Reply #2 on:** January 05, 2015, 08:20:40 PM »

Yea they will go right on. I have them on my dc4 lsr arms and my son has them on his houser arms. The ball joint is the same diameter were it goes thru the spindle.

trx250scar · « **Reply #3 on:** January 05, 2015, 08:23:40 PM »

I c u r kinda near me. I am just south of ocala. Got any real good riding down there?

dem3500 · « **Reply #4 on:** January 05, 2015, 09:02:56 PM »

I have them on my bike also. They bolt right on but you have to flip one end of the tire rod. Iirc its the spindle end. No big deal.

96bansheepilot · « **Reply #5 on:** January 05, 2015, 09:58:44 PM »

Trx250scar not much other than Croom. There is a cool spot in Haines city but croom and ocala are our spots.

trx250scar · « **Reply #6 on:** January 05, 2015, 10:14:24 PM »

We used to ride ocala a lot until they did closures and trailheads. Now we hardly ride there at all and it's 10 minutes from my house.