TRX250r.org

Author Topic: .ORG Shirts & Hoodies - Opinions Wanted  (Read 6051 times)

Offline havinnoj

.ORG Shirts & Hoodies - Opinions Wanted
« on: April 05, 2020, 06:41:24 PM »
Hey guys - want to make up some shirts and/or hoodies.  Not planning to make (& keep extras) so want to do a group order.  Typically after quantity of 6+, the price breaks start coming.  Would like opinions on which you'd prefer: 
1.  T shirts - short sleeve or long sleeve
2.  Hoody
3.  or both

Design feedback:
1.  Colors of shirt/hoody (white, red, grey, black, blue).  (Lots of options for logos - see the options below - we can refine this later).
2.  Logo placement for T's (large centered vs small pocket vs large rear).  For Hoody's I figure large center placement. 

For the T's - after reading reviews, will likely order these as Hanes Beefy TALL since the other options tend to shrink a bit in the wash.  Any issues with that, let me know please!

This will help me narrow down the options.  That will give us an idea on pricing and we can finalize logo design after.  For now here's a couple ideas to get the discussion started.
« Last Edit: April 05, 2020, 09:39:15 PM by havinnoj »

Offline havinnoj

Re: .ORG Shirts & Hoodies - Opinions Wanted
« Reply #1 on: April 05, 2020, 06:44:30 PM »
Some hoody designs. 
« Last Edit: April 05, 2020, 10:44:27 PM by havinnoj »

Offline jwraymond6

Re: .ORG Shirts & Hoodies - Opinions Wanted
« Reply #2 on: April 05, 2020, 06:57:34 PM »
I’ll order 2 hoodies and 2 shirts
87 363 sphynx built by Pete @ hybrid engineering

Offline havinnoj

Re: .ORG Shirts & Hoodies - Opinions Wanted
« Reply #3 on: April 05, 2020, 07:03:29 PM »
I’ll order 2 hoodies and 2 shirts


Thanks Jeremy.  And note for everyone, not looking to make money on these but I'd prefer to spend a few more bucks and get quality stuff also. 

Offline supernutt

Re: .ORG Shirts & Hoodies - Opinions Wanted
« Reply #4 on: April 05, 2020, 08:35:27 PM »
I would take 2 t shirts in black short sleeve.
86r 310 pro-x C-Leigh ported TRX5 CR ignition HLS shocks 38pwk
97 Laeger XC narrow CR500 link +4  t-pin
89 trx250r PEP ported ct mid pipe

Offline havinnoj

Re: .ORG Shirts & Hoodies - Opinions Wanted
« Reply #5 on: April 05, 2020, 09:28:45 PM »
I would take 2 t shirts in black short sleeve.

Right on, thanks!

Offline The norm

Re: .ORG Shirts & Hoodies - Opinions Wanted
« Reply #6 on: April 05, 2020, 09:50:23 PM »
Ryan, I am diggin theTshirt with small logo on the side and big on the back. I would take a red and black in 2xl, L, and M. So that's 6 T's for just me and the boys.  We will also be interested in hoodies in the same size range as the T's.
Loren
1986 Trx250r-- Hybrid Engineering 391(Good bye super 310)
1986 Trx250r-- Hybrid Engineering  ported stock 86 cylinder
1986 Trx250r-- craigslist engine with unknown ported 89 cylinder.
1985 Atc250r-- Needs a lot of work (Super 310's new home)

Offline havinnoj

Re: .ORG Shirts & Hoodies - Opinions Wanted
« Reply #7 on: April 05, 2020, 10:21:15 PM »
Ryan, I am diggin theTshirt with small logo on the side and big on the back. I would take a red and black in 2xl, L, and M. So that's 6 T's for just me and the boys.  We will also be interested in hoodies in the same size range as the T's.
Loren

Right on, thanks Loren!  Rendering up the hoodies next!

Offline havinnoj

Re: .ORG Shirts & Hoodies - Opinions Wanted
« Reply #8 on: April 05, 2020, 10:37:47 PM »
Added a few hoody options to post # 2

Offline jwraymond6

Re: .ORG Shirts & Hoodies - Opinions Wanted
« Reply #9 on: April 05, 2020, 10:59:11 PM »
I want to

1 3x hoodie in black and red
1 2x hoodie in black and red
1 1x hoodie in black and red
1 3x T-shirt in black
1 1x T-shirt in black
« Last Edit: April 05, 2020, 11:01:26 PM by jwraymond6 »
87 363 sphynx built by Pete @ hybrid engineering

Offline The norm

Re: .ORG Shirts & Hoodies - Opinions Wanted
« Reply #10 on: April 05, 2020, 11:23:32 PM »
Hoodie #3 in Medium,  Hoodie #4 in 2xL, and Hoodie #5 in L for me.
1986 Trx250r-- Hybrid Engineering 391(Good bye super 310)
1986 Trx250r-- Hybrid Engineering  ported stock 86 cylinder
1986 Trx250r-- craigslist engine with unknown ported 89 cylinder.
1985 Atc250r-- Needs a lot of work (Super 310's new home)

Offline havinnoj

Re: .ORG Shirts & Hoodies - Opinions Wanted
« Reply #11 on: April 06, 2020, 12:11:53 AM »
Hey guys sorry if it wasn't clear - COLORS & DESIGNS ARE JUST IDEAS at this point to help gauge interest on which color(s) we want to go with.  Keep the feedback coming.

Offline jwraymond6

Re: .ORG Shirts & Hoodies - Opinions Wanted
« Reply #12 on: April 06, 2020, 12:51:19 AM »
I think they all look good especially the black ones
87 363 sphynx built by Pete @ hybrid engineering

Offline Tbone07

Re: .ORG Shirts & Hoodies - Opinions Wanted
« Reply #13 on: April 06, 2020, 02:50:32 PM »
Are tall sizes a possibility?
LED Performance 350R
Laegers-JD Performance-GThunder-HLS-PEP-HiPer-GBC

RIP Laz

Offline havinnoj

Re: .ORG Shirts & Hoodies - Opinions Wanted
« Reply #14 on: April 06, 2020, 03:56:22 PM »
Are tall sizes a possibility?

Lol I hate to be this guy but this is too funny to pass up.. go read the first post  8)

 

Sitemap 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38