Messages

1

Engine and Bottom End / Re: First engine failure

« on: June 23, 2017, 10:55:45 AM »

That sucks man.  Hope they get it up and running for you. 

2

Lounge / Letting others ride your stuff?

« on: March 04, 2017, 07:50:16 PM »

I don't like to ride other people's stuff, I have bad luck with that shit.  Some people's loaner stuff is half broke already and I don't want to be blamed when it let's loose on me lol.  That said only my real friends who I know can ride well touch my R.  The twist throttle throws people off.  Everyone can ride my blaster tho

Sent from my Galaxy S5

3

Introductions / Not new but was wondering?

« on: October 11, 2016, 12:38:55 AM »

33 but feel like 20 lol

Sent from my Galaxy S5

4

Introductions / New

« on: September 19, 2016, 01:50:09 AM »

That seems pretty rich for a stock carb.  Might be compensating for the exhaust leaks leaning out the mixture but causing a fat pilot circuit.  What is the elevation?

Sent from my Galaxy S5

5

ATC250R / Jetting for ct pipe

« on: September 15, 2016, 10:42:42 AM »

I live about 2000ft and I use stock jetting.  48 pilot and ~150 main, air screw is 1 1/2 out I think.  This jetting worked for the FMF that it came with and the CT national I put on.  My lid is off though and I have a RAD valve which calls for 1 size smaller main.  Hope that helps.  To tell you the truth I would verify what needle you have because that can make a huge difference.

Sent from my Galaxy S5

6

For Sale - Parts / Random parts

« on: August 16, 2016, 10:00:57 PM »

PM sent on cushion.

7

Body and Controls / What seat is this and what it's value?

« on: August 05, 2016, 02:48:43 PM »

^^agreed.  They should be able to do whatever color you want.  I went to a local guy and I think it was like 50-60 bucks.  He just had to sand my foam a bit

Sent from my Galaxy S5

8

Body and Controls / Need Cable for CR250r twist grip to 39mm PWK

« on: June 17, 2016, 09:38:33 PM »

I did have high hopes for BDT since Carlos is knowledgable and active on the forums, in fact I thought he might be my new guy for motors.  His eBay clown and the male receptionist that answered BDT were far less than helpful.

That probably was Carlos lol

Sent from my Galaxy S5

9

Engine and Bottom End / New ESR motor running great

« on: June 17, 2016, 08:40:19 PM »

That looks sweet.  Have fun ripping it

Sent from my Galaxy S5

10

Lounge / Why don't you ever see 250r's out on the track?

« on: June 17, 2016, 08:25:35 PM »

One time I was riding with some people and a guy riding a rzr asked me "what is that ping ping thing".  I nearly spit out my water laughing.  I don't think he had ever heard a 2 stroke.

Sent from my Galaxy S5

11

Body and Controls / Need Cable for CR250r twist grip to 39mm PWK

« on: June 17, 2016, 08:07:43 PM »

I got a custom one made for me by terrycable.  It was for a magura twist off an old ktm to a 38 AS on my 86.  If they could pull that off I think they could do anything.  Motion pro wanted me to mail them my carb, throttle, and cable or they wouldn't guarantee it.

Sent from my Galaxy S5

12

Body and Controls / Rear light compatability question

« on: June 10, 2016, 10:03:56 PM »

Well done! Clean install with the Banjo switch.

Thanks man

Sent from my Galaxy S5

13

Body and Controls / Rear light compatability question

« on: June 09, 2016, 01:23:07 PM »

Well it works.  It was actually quite easy.  I went with an aftermarket light and fabbed up a little bracket to make up the space to the original bracket.  

I took the easy route and put it in the same circuit as the oem taillight which means I need to have one of my sets of headlights on for it to work which I'm ok with.  Also I made it even easier by only going off the rear brakes.  I used a banjo bolt that also controls an electrical flow with two leads on it.  It can be done to go off the front brakes as well but I didn't do it.  I am very "risk adverse" when it comes to messing with a 30 yr old wiring harness and don't want to mess it up.  I used the original bullet connectors heading to the oem taillight and ran one power and ground directly to the light with an additional power going to the banjo switch and then to the stop light.

Sent from my Galaxy S5

14

Body and Controls / Rear light compatability question

« on: May 10, 2016, 01:20:48 AM »

Thanks for the measurement.  That looks pretty close to what I need.  

Sent from my Galaxy S5

15

Body and Controls / Rear light compatability question

« on: May 09, 2016, 06:37:51 PM »

Cool, let me know if they mount differently or something.  I guess 450r it is

Sent from my Galaxy S5