Messages

1

Wanted / Re: long travel arms

« on: January 04, 2020, 04:44:13 AM »

sounds good thanks

2

Wanted / long travel arms

« on: January 02, 2020, 07:50:42 PM »

looking for plus2 or 3 plus 1 long travel arms no alba or american star thanks

3

Carburetor, Intake, and Exhaust / Re: adjustable air screw

« on: April 20, 2019, 06:26:30 AM »

got a jd on the way thanks for the help

4

Carburetor, Intake, and Exhaust / adjustable air screw

« on: April 19, 2019, 06:21:01 PM »

does anyone run a air screw that can be turned by hand? i have r&d flex jet on my 450r and its very handy i havent had any luck finding something like it for my 38 air stryker

5

Engine and Bottom End / Re: Water pump

« on: March 03, 2019, 01:58:14 PM »

its a merrill

6

Engine and Bottom End / Re: Water pump

« on: March 03, 2019, 08:54:57 AM »

well i put the stock cover back on this morning and did a test fire in the garage    it appears to me flow through the radiator haas increased a bunch

7

Engine and Bottom End / Water pump

« on: February 28, 2019, 08:39:12 PM »

I have been having a running hit problem and decided to check the water pump tonite   This is what I found    Would the difference in the cavity area restrict flow ? 

8

Carburetor, Intake, and Exhaust / rich at 1/4 throttle

« on: October 16, 2016, 08:35:02 PM »

choking helps but very hard starrting still even after being ridden, no hesitation just not as strong

9

Carburetor, Intake, and Exhaust / rich at 1/4 throttle

« on: October 16, 2016, 08:09:54 PM »

very hard starting and it does not pull as well

10

Carburetor, Intake, and Exhaust / rich at 1/4 throttle

« on: October 16, 2016, 07:56:38 PM »

no i have not

11

Carburetor, Intake, and Exhaust / rich at 1/4 throttle

« on: October 16, 2016, 07:13:48 PM »

my elevation is around 700 foot above sea level

12

Carburetor, Intake, and Exhaust / rich at 1/4 throttle

« on: October 16, 2016, 07:09:58 PM »

idle speed screw is almost all the way in, it does not seem to like  a pilot less than 55

13

Carburetor, Intake, and Exhaust / rich at 1/4 throttle

« on: October 16, 2016, 07:01:16 PM »

i did lower the needle one spot today it was full rich, this did help some

14

Carburetor, Intake, and Exhaust / rich at 1/4 throttle

« on: October 16, 2016, 06:32:01 PM »

im a bit rich at 1/4 throttle right now my current set up is a 370 race gas with a 38 air striker 58 pilot dgh second from full rich and a 180 main  what cn i  change to lean 1/4 throttle just a bit

15

Wanted / 86 swingarm

« on: September 30, 2016, 05:58:03 AM »

im looking for a stock length aftermarket swingarm for my 86  thanks