Topics

1

For Sale - Parts / parts for sale

« on: October 10, 2020, 05:52:00 PM »

Looking to thin out some of my extra parts. Prices are without shipping. I do not charge for my time, supplies or gas it get it to the hub. I will charge the cost of the shipping. I do not mark it up.

Chassis
-DG Rear Bumper for 88/89 Swingarm (New) $30
-OEM Front Motor Mounts: $30
      Older Chrome, but still good
-OEM 88 A-arms: $60
      Did a rattle can paint on them awhile back. They were packed away a came cross country with me. Paint has some scratches. Ball joints are tight. 3 of the boots have small punctures. Comes with castle nuts, seals and bearings. I don't see the spacers or tie rods, if I find them I will include.

Intake
-86/87 AirBoot: $25
-88/89 AirBoot: $35
  Comes with resonator
-88 OEM Air Box: $40
-K&N Air Filters for stock air box: $15/ea

Other Random Parts
-Cascade Front MC Cover: $15
-UPP Swingarm Protector: 20
    New, never installed.
-Motion Pro CR style Twist Throttle: $10
-Work Performance Front Shock Valves: $10
-Eibach Rear Spring: :$15
    Not sure on the spring rate. Set up for 170# rider on a stock 88 rear shock
-Rear Shockwear: $5

Things I am looking for

LRD/LED Team B pipe/silencer
LRD/LED 350D Pipe/silencer
Kill Switch
88/89 OEM headlights
Timmy Boy Front bumper
Hinson Quick Change Clutch cover

I have some other goodies that I'll list when I get to them

Feel free to email, text, PM or call. Text will get the fastest response.
Best Regards
-Jason
3 6 o 6 o 8 44 to 3

2

Lounge / Supercross

« on: May 30, 2020, 03:03:56 PM »

Anyone happy about the return of supercross? Its one of the few things I watch on tv. Interesting dynamics coming into play with the extended break and fast schedule for the remaining races.

3

Lounge / oxy acetylene

« on: May 09, 2020, 09:06:11 PM »

Any welding pros out there? I need to cut out a hardened steel pin. It's 1.5" x7". If I cut it radially I have about an 8mm gap. cutting on axis I have a clear shot, but it's 7" of material to cut through and there is danger of cutting through parts I need to keep.

Looking at using oxy acetylene but I am not sure of the different torches and types of regulators. Any concerns with buying used? Suggestions are appreciated.

Best regards
-Jason

4

Lounge / 2 stroke return for MotoGP and F1??

« on: January 15, 2020, 12:06:14 AM »

I keep seeing stories about MotoGP and F1 possibly moving towards 2 stroke motors by 2025. Either that or electric.

https://www.visordown.com/news/racing/motogp/could-motogp-return-two-stroke-engine-formula


Would be awesome, but I won't hold my breath

5

Wanted / Laeger Cr500 Swing Arm

« on: June 08, 2017, 10:27:40 PM »

Looking for a Cr500 laeger swing arm. Let me know what you have

6

Lounge / Sand Lake on Sunday?

« on: October 07, 2016, 03:42:15 AM »

Back to the NW from Texas. Heading down to Sand Lake on Sunday. Should be down Derrick road. Will have a black R with blue frame. Feel free to swing by


Best regards
-Jason

7

Suspension and Chassis / Lobo chassis question

« on: October 10, 2015, 12:38:33 PM »

Looking for a little help on a Lobo chassis. Was hoping someone with one could measure the width of the top pivot on the rear shock. Also the overall shock length. I am a few thousand miles away from mine and looking at buying a used no link rear shock. I remember the Roll uses a fairly small pivot width. I want to say it a inch or so, not sure on the length.


Thanks in advance
-Jason

8

Wanted / WTB. Timmy Boy Front bumper

« on: September 18, 2015, 01:22:35 AM »

Looking for a Timmy Boy Baja style Front bumper. Let me know what you have  


Best regards
- Jason

9

Lounge / not your typical jet ski

« on: August 02, 2015, 11:31:04 PM »

Truly all terrain

https://m.youtube.com/watch?v=lDi9uFcD7XI

Best regards
-Jason

10

LED Performance / LED Intake and 350G pipe on a Lobo Frame

« on: August 22, 2014, 12:08:57 AM »

There was some interest in how the LED intake fit the Roll Design Lobo frame. I thought I would share some pictures.



Plenty of clearance around the plastics (old Fullbore), frame and head-to-pump coolant hose. I did end up running a different coolant hose that runs from the pump to the radiator. There are some frame supports that push the stock hose too close to the pipe. It is a Gates hose Part# 19707. Had to do a little trimming, but it fit well.

There might be a better hose out there, but this was available at the auto parts store...and, come hell or high water, I was going riding the next day. The crude exhaust bracket was my own design, as Roll failed to design a frame with an exhaust mount. I had to run this bracket back to the gas tank mount. I'll have LED fab me up something soon.

Here is the Intake. LED does make a few different ones. This one is specific to the Lobo chassis. It is tight, but there is clearance from the shock being fully extended to bottomed out. I am going to see about getting an air box made.




If you would like to see any specifics, let me know.


Best Regards
-Jason