Messages

1

For Sale - Parts / 88/89 Isf racing swinger

« on: May 11, 2018, 01:18:27 PM »

Brand new, 88/89 length, $450 shipped

2

Suspension and Chassis / Re: CR500 Rear Linkage

« on: January 04, 2018, 02:37:11 PM »

I’ve used stock and aluminum airbox with oem intake . They work ok but the biggest issue I had was caliper hitting them. I ended up making my own box and running a roble carbon fiber trx450 intake . It opened the motor up a ton

3

QOTM - Sponsored by Eddie Sanders Racing / Vote Now for July 2016 QOTM!

« on: June 27, 2016, 04:36:52 PM »

The poll is located at the top of this thread Steve. Good luck!

I'll have to look in a pc, I can't find it on the app


Thanks!
  Steve

4

QOTM - Sponsored by Eddie Sanders Racing / Vote Now for July 2016 QOTM!

« on: June 27, 2016, 11:33:32 AM »

Voting is now open!

How do we vote?


Thanks!
  Steve

5

Wanted / Iso Laeger narrow cr link hybrid. Whole bike or partial doesn't matter

« on: June 27, 2016, 10:08:02 AM »

Iso Lae narrow hybrid


Thanks!
  Steve

6

QOTM - Sponsored by Eddie Sanders Racing / Enter Now for July QOTM!

« on: June 25, 2016, 08:11:57 AM »

Details.....
 
99(I think) Laeger narrow cr500 link
+4 +1 chrome protrax
Laeger chrome 18.5" swinger
Laeger +1 up stem
Pep pb1 all way around
4:1 shamrocks up front with maxxis rzr cross
3:5 shamrocks out back with holeshots
Rpm dominator axle
Durablue anti fade
Rath monster pro pegs modified by white chassis for the Lae frame
Fullbore plastics
86/87 seat with fourwerx cover
Pro taper bars
Rtc levers
Esr brake pedal
Pro design -1 shifter
Isf shrouds
Cbr radiator
Precision pro dampener
Duncan dr1000 front bumper
Motor

Bhp 363
Esr cases
01 cr ign
Stock stator cover
Hinson quick change
Hinson 8 plate
Yukon gears
Vf3 reeds/cage
Port matched upp intake
Pwk39 carb
Led 350g pipe

I included a picture from when I picked it up too












Thanks!
  Steve

7

Suspension and Chassis / Laeger protrax replacement parts

« on: January 03, 2016, 06:38:04 PM »

Yes for the complete kit,
4-spherical bearings
2-thrust bearings
2-needle bearings
8-bronze bushings
2-left and 2- right rid ends with jam nuts
4- retainer clips
All orings including the ones for the aluminum spacers


Thanks!
  Steve

8

Suspension and Chassis / Laeger protrax replacement parts

« on: January 03, 2016, 09:19:51 AM »

These are the kit, clips, retainer rings and o rings not in the pic



Thanks!
  Steve

9

Suspension and Chassis / Laeger protrax replacement parts

« on: January 01, 2016, 07:33:15 PM »

I'm Isf racing, I do have 4 ready to go minus the one seal, I should find out how much longer it will be on it Monday. I ordered them 6 weeks ago. I also have a arm bushing and sleeves ready to go as well.


Thanks!
  Steve

10

Suspension and Chassis / Roll Design Bumpsteer Issue

« on: November 04, 2015, 12:02:30 PM »

If your using a string from rear to front and it seems off it may be your Frame. Stand it up on the grab bar and use a 6' level to see if the center of the swingarm at the axle housing is in line with the center of frame at the pegs and the steering stem. If your running mx you should be setting your camber .5-1.5 degrees, I've never heard of setting it at 0 but I've not heard everything.


Thanks!
  Steve

11

Wanted / Radiator Shrouds

« on: November 03, 2015, 10:03:37 PM »

Thanks man!


Thanks!
  Steve

12

Wanted / Radiator Shrouds

« on: November 03, 2015, 09:01:45 PM »

I have new mirror finish stainless ones with hardware for sale


Thanks!
  Steve

13

For Sale - Parts / Fs

« on: October 19, 2015, 10:24:00 AM »

Thanks!
  Steve

14

For Sale - Parts / Fs

« on: October 19, 2015, 10:22:59 AM »

Stainless mirror finish shrouds, comes with grommets and hardware
$82 shipped as gift or $85 as merch
Please tx me if you want a set don't message, 9417734942



Thanks!
  Steve

15

Suspension and Chassis / Lobo chassis question

« on: October 16, 2015, 05:20:46 PM »

I can check wed, if you don't hear from me just remind me


Thanks!
  Steve