Messages

1

Duner / Glamis New Year 2015

« on: October 17, 2014, 08:22:53 PM »

I will there usually wash 10.  Not sure what day we are going yet.  Let me know always ready to ride with new people.

2

For Sale - Parts / Chrome side covers cr ign

« on: June 07, 2014, 12:06:16 AM »

Would you sell the stator cover by itself if so how much?
Thanks

3

Wanted / Wanted Loaner pipes for dyno runs

« on: May 12, 2014, 07:01:53 PM »

The b has a bigger diameter pipe after the exhaust flange it is supposed to be better for the bigger motors.  I am not sure if it works better or not I just had one dune trip on the new motor.

4

Wanted / Wanted Loaner pipes for dyno runs

« on: May 12, 2014, 02:25:38 PM »

I live in mesa I have fmf fatty,Paul turner 89 race, one of jerries hand cones pipes, and esr trx5B pipes you can use.  Iwas thinking of having jerry do the stinger modification to the esr pipe to help my
370.

5

Carburetor, Intake, and Exhaust / esr 370 tuning questions

« on: April 02, 2014, 04:06:42 PM »

Just put a brand new esr 370 with the 5 mil crank together.  It has the 9 port with 5b std pipe with  40.5 kiehin carb 55 pilot 190 main dgh needle in the forth slot from the top.  Gearing is 14/38 with 20 in 8 paddle haulers.   When I finally  got the bike running good I went on sand highway at Gordon's well and bike runs great thru fourth gear when shifting two fifth it stops pulling and holds the speed or gradually increases speed.  Bike runs clean thru all rpms plug looks good nice dark tan.  I am expecting too much for bike to pull fifth and sixth gear.  It seems like it should pull fifth and sixth in the flats probably not in the dunes.  Looking for any suggestions gearing pipe or whatever.

6

Engine and Bottom End / clearancing for 5 mil crank

« on: February 24, 2014, 10:09:22 PM »

Got the crank in just had to clearance a small amount on the top corners.  Should be dune ready in a couple weeks.   Thanks for the tip on inserting crank with cylinder and old piston.

7

Duner / lets see some pictures of your duners!!!

« on: February 24, 2014, 08:22:30 PM »

Here's mine not the best picture.  Usually out riding and don't take pictures when at glamis.

8

Engine and Bottom End / clearancing for 5 mil crank

« on: February 22, 2014, 04:55:45 PM »

That is with the old crank in the case.  The new crank is from esr.

9

Engine and Bottom End / clearancing for 5 mil crank

« on: February 22, 2014, 03:49:57 PM »

Do I need to clearance the upper crankcase for 5 mil stoked rod clearance?

10

For Sale - Parts / Hinson quick change cover...

« on: January 21, 2014, 08:55:30 PM »

Is the clutch cover still available.  Thanks