TRX250r.org

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - mrmoto

Pages: [1] 2 3 4
1
Lounge / On any Sunday on net flix
« on: September 23, 2013, 01:35:58 AM »
The Lake Elsinore GP is still an annual event after 44 years. If you haven't ridden in the LE GP, you haven't lived LOL :jumping0041:

http://lakeelsinoregp.com/

2
Lounge / What's up with SPEED channel?
« on: August 20, 2013, 03:09:26 PM »
I fricken hate Fox anything. And during the first AMA National on the new station, just as Tomac and Roczen were dicing for the lead at Utah, they go to commercial. When the race comes back on Tomac had made the pass. RUINED is all I can say...

Then again, that same thing happened when it was Speed...

3
Pumashine 250R Products / Pumashine/TLR Exhaust Hanger ATC Fitment
« on: August 06, 2013, 09:46:50 PM »
The spacers and washers give you a lot of flexibility. Like with mine. 1 simple 10 second adjustment and all is perfect. As we all know there are a ton of different pipes out there and none fit the same. Being able to make a quick adjustment is very important. The OEM hangers have no flexibility at all.

4
Pumashine 250R Products / Recent ATC air box lid kit purchase
« on: August 06, 2013, 06:51:12 PM »
Same here. Perfect!!

5
Pumashine 250R Products / Pumashine/TLR Exhaust Hanger ATC Fitment
« on: August 06, 2013, 06:49:12 PM »
Follow up: No Joke, these hangers worked absolutley perfect for my 1985 OEM cylinder/Billet flanged ATC250r with a PT Hi Rev/Fatboy 2. The only thing I did was grind about .020" off the spacer for the front mount. My PT fits just perfect. I am completely stoked with these hangers!:ride:

6
What I am looking for are billet straps for my ATC 250R. I have a 38 AS with the stock air boot and stock intake. I am currently using a CR500 strap on the intake and this on the airboot.  http://www.ebay.com/itm/161028678554?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649&afsrc=1
 They both are completely functional but I am looking for something nicer looking. Below is a pic of the strap from an eliminator kit. That's what I am hoping to find but without that hanger/bracket


7
Wanted / GOLD OEM TRX Rear Rim in Great Shape
« on: August 02, 2013, 03:29:12 AM »
Bump. Still need a gold rim. I will also buy both if need be. Also, they can be either ATC or TRX rims. Just looking for really great condition.

8
Duner / Pismo august 1-4
« on: July 30, 2013, 01:20:07 AM »
Well my parents are coming here for a birthday on Sat and a bbq on Sun and will be staying with me at my house this weekend . I thought about swapping houses with them for the weekend (they live in Paso Robles, I live in LA) but I need to spend time with them. Maybe next time :(

Have a great time everyone, and tear that @#$%^& up!!

9
ATC250R / ATC 250R Air Box lid Mod
« on: July 29, 2013, 05:18:37 PM »
I emailed Steve last night. Haven't heard any thing yet but it's Monday so not surprised it all.

How strong is the material? Does it feel like it could rip easily? The cost is extreme and if they rip easily I may just make my own from the OW sheet.

10
Lounge / windows 8 is the worst...
« on: July 21, 2013, 05:38:22 PM »
8 blows. loaded it for about 5 minutes and then pulled those drives out of my PC and put my win 7 array back in.

11
Duner / Pismo august 1-4
« on: July 20, 2013, 01:11:25 PM »
Got my new Skat Trak's mounted on rims today. Lights are on. One last jetting session at my sisters which is 45 minutes from Pismo and I am good to go.

12
Lounge / My New Cyclops Penetrator 625 Lights
« on: July 19, 2013, 04:29:57 PM »
That's what I am shooting for. When we get closer to that date I'll hit you guys up so we can figure out how to hook up. I haven't been there since the late '80's so I don't remember whats what

13
Lounge / My New Cyclops Penetrator 625 Lights
« on: July 19, 2013, 03:50:48 PM »
They claim 5 hours runtime. I am going to buy another set of batteries once I have run them at night and have confirmed they are what I want. But yeah so far what I have seen at home they are very bright. http://www.cyclopsadventuresports.com/?page=products&id=164

I have a combination of the following. 4 610's in the middle and the 2 outside's are 625
610 is a 10deg beam pattern
625 is a 25 deg beam pattern

14
Lounge / My New Cyclops Penetrator 625 Lights
« on: July 19, 2013, 03:04:48 PM »
They have good distance down my street lol. 3000 Lumen. Haven't had them out yet. I am hoping to do some night riding at Pismo around the first of the month. I also need to finish jetting it and I am going to be looking closer at the porting but I wanna ride it when it is jetted right first so I will be getting it out there very soon and will let you know

15
Lounge / Where to buy 110 in pismo ?
« on: July 16, 2013, 05:27:05 PM »
Quote from: etccb;4155
Grover Beach Motorsports, 1206 Grand Ave., Grover Beach, CA 93433 - 805.474.6431
No 110. C12 only at 72.00 per can. No certified racer required.
I google mapped and street veiw until I found the quads on the sidewalk, too funny.
I was going to suggest that.

The Honda dealer closest to my house stopped selling VP altogether but sells Sunoco no questions asked. I asked about this and was told there is to much hassle/paperwork to sell VP. I took that with a grain of salt but WTF! Big Oil running the little guy outta town? I just don't know. Sorry didn't mean to veer off topic

Pages: [1] 2 3 4