Messages

1

TT/Flat Track / Rear rim recommendations for flat track

« on: August 25, 2016, 10:54:15 PM »

Great thanks for the help guys should be tearing up the track next race. Just gotta get my carb dialed in for the change in elevation.

Sent from my Nexus 6P using Tapatalk

2

TT/Flat Track / Rear rim recommendations for flat track

« on: August 24, 2016, 09:11:33 AM »

I see alot of 10" setups I was thinking of going trying a 8?5" tire. I'm a light guy at 130lbs I think the 10's might bite a little to much in the corners but I will keep it in mind. Thank you.

Sent from my Nexus 6P using Tapatalk

3

For Sale - Parts / '88 oem front fenders and oem vinyl .

« on: August 23, 2016, 01:14:28 PM »

http://s47.photobucket.com/user/plasmablue636/library/1988%20honda%20trx%20250r%20front%20fenders

Tapatalk was being a pain and wouldn't let me upload them so I made a album on my photo bucket. These came off my bike a fee months ago when I bought it. No spidering , some light scratches. All mount holes are in great shape and not crack. The right side middle hood mount is broke but it's all there and is still functional. I'm looking for $525 shipped. I am located in rI and will meet if you want. Either money order, PayPal whatever you prefer. My email is lsvtec101@gmail.com or contact me thru here. Thanks!!

4

Wanted / WTB 88 trx 250 items

« on: August 22, 2016, 01:43:47 PM »

I have a complete headlight switch tc setup if interested. Also have a oem harness

Sent from my Nexus 6P using Tapatalk

5

TT/Flat Track / Rear rim recommendations for flat track

« on: August 22, 2016, 01:30:43 PM »

Got sucked into flat track now haha what's a good rim and tire setup to use on the 250r? I'm going to keep the front knobbys for now just want to get the rears taken care of.

6

Introductions / New England RRrrrrrr

« on: June 13, 2016, 11:01:47 AM »

Welcome aboard!!

Fellow Rhode Islander here!!  New to the "R" scene?

Did you buy that off a guy named Scott?

Those power line poles look like the new ones they've been putting up in northern RI, is that where you're at?

Ya in burrivile. Got pinched tho said I can't be up there. I have a spot across from the emerlad square mall and a huge track like behind my girls house in brockton,ma. Yes new to the R scene not 2 strokes or dirt bikes tho. Been to the track once, have a pwk 38 on the way just trying to get the bike dialed in. Starting on building a LED 330 piece by piece.

88 250r, Trinity 2 port, fmf fatty,fat boy2 , Easton bars, axis shocks, OEM uncut plastics

7

Wanted / Wtb: Pwk 36mm or 38mm carb

« on: June 13, 2016, 10:58:22 AM »

Alset guys got a 38mm pwk from a member. Thank you!! Where should I start with jetting I have a buncha pj mains. 172,178,168 and a couple more. Also what to run for a piolet .

88 250r, Trinity 2 port, fmf fatty,fat boy2 , Easton bars, axis shocks, OEM uncut plastics

8

Wanted / Wtb: Pwk 36mm or 38mm carb

« on: June 10, 2016, 09:16:56 AM »

I have a 36 the front was milled to fit a stock boot.

Can you send me pics?? I think a 36 will be perfect for my motor.

88 250r, Trinity 2 port, fmf fatty,fat boy2 , Easton bars, axis shocks, OEM uncut plastics

9

Wanted / Wtb: Pwk 36mm or 38mm carb

« on: June 09, 2016, 09:30:31 PM »

I have a nice Mikuni TMX 38 I would sell.

Not that familiar with mikuni's I'll do a little research.

88 250r, Trinity 2 port, fmf fatty,fat boy2 , Easton bars, axis shocks, OEM uncut plastics

10

Wanted / Wtb: Pwk 36mm or 38mm carb

« on: June 09, 2016, 05:06:39 PM »

Ive got a 39 pwk Im trying to sell. I upgraded engine size and went to a 41.2 carb. I bought the carb used off of a buddy who had let it sit on a shelf for a while, I ordered a genuine Keihin rebuild kit for it, so it has new gasket, float, float jet, spring etc. and ran it for nearly a year. Just pulled it off recently. Im trying to sell it for 150 and that includes shipping. Let me know if you are interested.

Man that's a good deal. I'm on a standard bore motor with a port job vforce 2's and fmf pipe I think the 39 might be overkill or no?

88 250r, Trinity 2 port, fmf fatty,fat boy2 , Easton bars, axis shocks, OEM uncut plastics

11

QOTM - Sponsored by Eddie Sanders Racing / Vote Now for July 2016 QOTM!

« on: June 09, 2016, 02:35:07 PM »

88 R
Trinity port job
Axis front shocks
Oem uncut fenders
FMF pipe, fatboy 2

88 250r, Trinity 2 port, fmf fatty,fat boy2 , Easton bars, axis shocks, OEM uncut plastics

12

Wanted / Wtb: Pwk 36mm or 38mm carb

« on: June 09, 2016, 01:25:48 PM »

I would like a 36 but 38mm will do just need to ditch the pj.

88 250r, Trinity 2 port, fmf fatty,fat boy2 , Easton bars, axis shocks, OEM uncut plastics

13

For Sale - Parts / Fs:88 seat cover, 88 long rod crank

« on: June 05, 2016, 12:09:35 PM »

Prices aren't firm shoot a offer worst I can say is no. Prob better off just to throw the seat cover Into storage with my oem plastics. I could careless about fees and shipping in the lower 48 . I figured 75 for a seat cover wasn't to damn bad but if I'm going to get crucified for it whatever. Shoot me offers

88 250r, Trinity 2 port, fmf fatty,fat boy2 , Easton bars, axis shocks, OEM uncut plastics

14

Introductions / 1989 trx 250r

« on: June 01, 2016, 07:28:56 AM »

Very nice!! Enjoy!!

88 250r, Trinity 2 port, fmf fatty,fat boy2 , Easton bars, axis shocks, OEM uncut plastics

15

For Sale - Parts / Fs:88 seat cover, 88 long rod crank

« on: May 28, 2016, 12:46:44 PM »

I don't see ya getting 185$ for that crank. Looks good doesn't mean it is good lol

The bike was running when it was pulled. Have to figure 25$ to ship they are not light

88 250r, Trinity 2 port, fmf fatty,fat boy2 , Easton bars, axis shocks, OEM uncut plastics