Show Posts

1

Suspension and Chassis / Laeger protrax replacement parts

« on: December 29, 2015, 09:48:12 AM »

I got all the part numbers and some prints of machined components if u need it

2

Wanted / Wanted Laeger No-link Pro-trax

« on: September 18, 2014, 07:43:51 PM »

Yes. Laeger no link will bolt right to a cr500 link frame. But the air box won't clear

3

For Sale - Complete Bikes / 2000 Walsh 310R

« on: September 05, 2014, 09:22:10 PM »

Still for sale?

4

For Sale - Parts / 250R parts lot - Chassis stuff - lots of parts

« on: July 29, 2014, 07:30:18 AM »

list updated

5

For Sale - Parts / 250R parts lot - Chassis stuff - lots of parts

« on: July 27, 2014, 06:01:00 AM »

More TRX250R parts for sale, lots of chassis items
*Elka front piggyback shocks, 16.5"in length, std travel with comp adjust, damping feels good, was on +2 a arms, unsure of weight setup, bushings & seals are good, ready to bolt on & use $400
*+2 a arms, look like Laeger but cant be 100% sure, all bushings - tie rod ends - ball joints are tight, comes with mounted 400EX spindles - tie rods & ends - a arm bolts, black in color, could use new pc $350
*Houser std length 88/89 18" swingarm, pivot setup for 86/87 motor mount, no cracks, all pivot hardware & pivot bolt included, also comes with TM chain slider $275
*Blingstar front bumper, some scratches but straight and not beat up $65
*Stock thumb throttle assembly with Rath racing billet top cover, good condition $50
*Dura blue anti fade rear brake lock nut, great condition, not beat up $90
*ESR red billet water pump cover $25
*Dominator II mx axle, perfect $275
*Aluminum airbox, perfect with no chain rub or cracks or scratches $90
*ProDesign kill switch, red with some fading, $15
*ProArmour kill switch, fits both bar sizes, nice $25
*86/87 seat with black/gray flame cover, nice $80
*86/87 X Factor propeg nerf bars with all mounting hardware in perfect condition $150
*X Factor propeg nerf bars for Walsh - Laeger - LSR propeg frames, fair condition $60
*OMF radiator shrouds with the grommets & spacer mounts, very nice & perfect $45
*AC belly pan with all mounting hardware $75
*Billet aluminum tapered (16) lug nuts $20
*T&T black rear brake block off plate $10
*Works Connection billet clutch perch, new cable, cable mount $50

All prices are shipped in the US48 and include paypal fees.
Everything has a little wiggle room, but everything is priced reasonable. Willing to make package deals
call text message for more details or pics
270-402-2843
Located in Lebanon, KY 40033
ktucker23@windstream.net

6

For Sale - Parts / 250R motor stuff - Sparks top end and other stuff

« on: July 27, 2014, 05:59:56 AM »

*Curtis Sparks top end, 69mm bore, YZ250 piston, CR250 reed cage & intake, spacer plate ,exhaust flange, ProDesign cool head with O-rings, ready to bolt on and use $525 *Duncan racing pyramid reed cage and CR250 intake, reed are good, ready to use $75
*Complete TRX250R electrical setup, coil - cdi - stator - flywheel - mx cut wiring harness $250
*ESR red water pump cover $25

All prices are shipped in the US48 and include paypal fees.
Everything has a little wiggle room, but everything is priced reasonable. Willing to make package deals
call text message for more details or pics
270-402-2843
Located in Lebanon, KY 40033

7

For Sale - Parts / ITP XC GNCC wheels & tires

« on: July 27, 2014, 05:58:44 AM »

ITP holeshot XC front tires and wheels
22-7-10 front
20-11-9 rear
Tread is 50% ~ %60
One front tire has a couple plugs
Rims are painted black on the outside only
Rims are not beat up, lug holes are good
No leaks

Rim ate ITP with reinforced rings

$225 for the front
$225 for the rear
OR $400 for the set
Willing to ship
call text message for more details or pics
270-402-2843
Located in Lebanon, KY 40033

8

For Sale - Parts / Massive 250R parts lot sale - chassis stuff & goodies

« on: July 20, 2014, 10:22:03 PM »

Massive 250R parts lot sale.

*Houser +1+1 stem with 1.125" top clap with nice chrome $175
*Aluminum airbox, perfect with no chain rub or cracks or scratches $90
*RTC front brake lever and clutch perch/lever, nice, tight & straight $50
*38mm Air Stryker car & cable $175
*LRD unlimited rev CDI & wiring harness $100
*Complete electrical setup, coil - CDI - mx cut harness - stator - flywheel $230
*ProDesign kill switch, red with some fading, $15
*ProArmour kill switch, fits both bar sizes, nice $25
*86/87 seat with black/gray flame cover, nice $80
*86/87 X Factor propeg nerf bars with all mounting hardware in perfect condition, will fit Laeger - Walsh - LSR propeg frames, just don use the hardware $150
*X Factor propeg nerf bars for Walsh - Laeger - LSR propeg frames, fair condition $60
*Cross flow oversize radiator $100
*LSR steering block with bushing and bolts $35
*ProDdesign -1 shifter $30
*Nacs case savers, blue $10...
*Hand made wire EDM cut case savers, new $10 each
*(1) red air box ring $8
*Wrap around billet exhaust joint seal $15
*Chrome std length 86/87 brake pedal $25
*Rath racing throttle cover $25 - just th cover or $50 for the whole throttle assembly
*OMF radiator shrouds with the grommets & spacer mounts, very nice & perfect $45
*AC belly pan with all mounting hardware $75
*ESR red std length shifter $25
*ESR -1 red brake pedal $30
*ESR red water pump cover $30
*Billet aluminum tapered lug nuts $25
*Billet aluminum rear axle nuts $15
*T&T black rear brake block off plate $10
*86/87 billet gas cap $20
*Poweremadd yellow/black handguards, with mounting hardware $20
*Works Connection billet clutch perch, new cable, cable mount $50

All prices are shipped in the US48 and include paypal fees.
call text message for more details or pics
270-402-2843
Located in Lebanon, KY 40033
ktucker23@windstream.net

9

Hybrid 250R / Maintenance on 250R Hybrids

« on: June 24, 2014, 03:19:11 PM »

I have 3 now. Walsh crf450 LSR crf450 Laeger yz450. All for sale

10

For Sale - Parts / Pep big bottles LT 18 3/4

« on: June 24, 2014, 03:17:12 PM »

Change out the internal spacer an the length would b right

11

Other ATV's / Laeger Protrax LT250R

« on: June 04, 2014, 11:06:18 PM »

jimmy at t&t has one

12

For Sale - eBay Auctions / Another Quick Change

« on: May 14, 2014, 06:15:19 PM »

I sold my last one for $450. Just bought a quad with another one on it.

13

For Sale - Complete Bikes / 2001 Lone star for sale or part out

« on: May 05, 2014, 10:35:03 PM »

2001 Lone Star 250R XC quad, sell whole quad for $3400 but will entertain part out offers. Like to sell chassis minus motor. Quad is in decent condition. Cannot find any damage or repair to the frame. Lower front shock bushings need replaced and lower ball joints.

Sparks 69mm cylinder
38PWK AS
V Force reed cage...
Hinson basket
FMF pie & silencer
Houser +1 (+2?) a arms with Elka quad rate shocks
No link rear with Elka shock
LSR Axle - nut - carrier
Good fenders & nose
Front tires & wheels are sold, rears are not included.
270-402-2843
Located in Lebanon, KY
ktucker23@windstream.net