Messages

1

For Sale - Parts / Transmission for sale

« on: October 07, 2014, 12:39:05 PM »

anyone interested can make me an offer. ill take any fair offer for it.

2

For Sale - Parts / Transmission for sale

« on: October 06, 2014, 10:51:23 PM »

Selling my spare transmission. $325shipped
All parts are there and are in near perfect condition.

3

For Sale - Parts / For Sale. Msd programmable ignition, Boss nos nitrous kit, 16" marvin shaws

« on: July 08, 2014, 08:57:21 AM »

MSD IGNITION $520 shipped .. includes (msd programmable ignition box, msd coil, ballistic battery, oem flywheel, oem stator)

Boss Nos nitrous kit $550 includes... ( bottle, smart box solenoid, mounting brackets, all wiring and lines, pingel switch)

Marvin Shaws $250.. 16" eye to eye bodies are shaved/smoothed

Msd and Nitrous kits were put on a bike, but sold before they were ever used. they are in new condition

For faster response message me at CustomSeatsOfLouisiana @ facebook

4

For Sale - Parts / CR IGNITION for sale.

« on: July 06, 2014, 12:41:37 AM »

Ignition system for sale  $580 shipped obo
includes;
ignition system
250r rev box
cr 125 ignition
coil
plug wire
esr billet mount

I can be reached at CustomSeatsOfLouisiana at facebook also

5

For Sale - Parts / 496cc Saber motor for sale

« on: July 02, 2014, 03:10:54 PM »

thanks fellas.. beginners can ride it. just be easy on the throttle lol

6

For Sale - Parts / 496cc Saber motor for sale

« on: July 01, 2014, 11:06:47 AM »

496cc Sabertooth for sale $5800
includes complete motor with pipe and carb and ignitions
496cc motor package (polished cylinder and head)
Nate McCoy billet tranny (1-5 neutral down)
52mm Lectron carb, billet bowl, dual power  jets (show polished)
Shearer oof drag pipe (fresh chrome)
CR ignition system with 250r & 125cr rev boxes
MSD programmable ignition with msd coil and ballistic battery
DD lock out with extended kicker shaft and polished cover
V force reeds
3" intake with new airfilter

I can be reached here or for more speedy info contact me at CustomSeatsOfLouisiana at facebook

7

For Sale - Complete Bikes / 496cc Sabertooth Hybrid for sale

« on: July 01, 2014, 11:00:15 AM »

updated pics.. and price drop. $7500 bike with all spare parts
                                            $5800 motor/pipe/carb with CR and MSD ignitions and Boss Noss nitrous kit
                                            $3500 complete chasis minus motor

8

For Sale - Complete Bikes / 496cc Sabertooth Hybrid for sale

« on: April 05, 2014, 06:56:58 AM »

not sure of a top speed.. i had the pipe chromed yesterday and sent the carb off for polish. i also had a custom 32 tooth ti rear sprocket made and purchased a new nitrous kit..once the carb gets back we will hook up the new components, dyno tune it, and ill be able to give you some times in the 1/8 mile asphalt as well as 300ft dirt.She should fly though.

9

Lounge / WOW - Hope this isn't one of our members...if so what the heck?

« on: March 15, 2014, 08:17:03 PM »

$750 a seat?.... hell i could retire if i got even close to that for seats..lol..

10

For Sale - Complete Bikes / 496cc Sabertooth Hybrid for sale

« on: March 15, 2014, 08:06:39 PM »

Selling my 496 Sabertooth Hybrid..
price complete $8,000
chasis without motor $4500

Chasis includes($4500);
-Modified and lightened 450R chasis.. chasis accepts 250r and/or 450r motors without any modifications.
(chromoly engine cradle was fabricated to accept both motors). Rear of the chasis was notched for carb and intake clearance.
- Swingarm = +14 double arched aero tube in chrome
- Subframe = one off double arched aero tube to match subframe. Mounting points are raised similar to yfz for a clean look.
- A Arms = Single A arm setup with +4 -2 measurements
- Tie rods = aluminum tie rods
- Suspension= Chromoly front struts, marvin shaw rear
- Axle= JJ&A aluminum drag axle
-Brakes = Brembo caliper and alum stay. setup was the first sold for a 450r from Cuervo Racing.. Master cylinder is off Honda CRF to eliminate resi
- Controls = ASV clutch lever, Moose polished throttle.
-Stem= chromoly lightweight stem
-Wheels= Direct Drive custom cut 12x3" spindle mounts.
-Pegs= aluminum footpegs
-Grips= RIS billet alum grips
-Body= scooped hood with one off candy paint with 2 stage hydro dip
-Carrier= polished 450r with ceramic bearings
-Fuel cap= polished alum cap
-Seat= shaved height with carbon fiber material.
-Radiator= Aluminum light weight radiator
-Chain= Gold D.I.D chain
-Sprockets= 15, 16, 17 fronts 36, 34, 32rears
-Bolts= Titanium pivot bolt, Titanium brake bolts, Allen head polished chasis bolts

Engine Specs;
496cc Sabertooth package
52mm Lectron w dual power jets and fuel pump
Nate McCoy billet tranny with 1-5 override/ neutral down
Direct Drive lock out with extended shaft
MSD programable ignition,MSD Coil, Ballistic 4 cell battery
Shearer oof drag pipe with interchangable stinger/silencer
pingel petcock
custom alum intake

Spare Parts;
-OEM complete transmission with all forks and components.(not override)
-CR Ignition and timing plate from ESR
-2 oem rev boxes for trx250r
-2 oem coils for trx250r
-spare set of oem plastics (450r)
-spare fuel pump

**Chasis is 100% new and has never been raced since fabrication.Color is a custom Illusion Red powdercoat. All other components are polished or chromed**

11

Engine and Bottom End / MSD Ignition.. pros and cons?

« on: December 31, 2013, 08:20:34 PM »

I talked to shearer a while back, he recommended the msd for the saber. said for drag racing the msd is the only way to go.So future plans call for sending my bike to Ryan Hormell at Hormells Extreme Atv in Lafayette. Ill let him order the programmable msd, install it, then dyno tune it to get the max hp and best timing curve out of it..he said its a little trickey to set up initially but once its setup its good to go... guess time will tell..

12

Engine and Bottom End / MSD Ignition.. pros and cons?

« on: December 24, 2013, 05:00:47 PM »

considering going with the msd ignition and coil setup on my saber. what are the pros and cons of it? also are the benifits worth the upgrade and how much trouble are they to setup?

13

QOTM - Sponsored by Eddie Sanders Racing / Vote Now for December 2013 QOTM!!

« on: December 10, 2013, 11:13:36 AM »

beautiful bike!!! great job on it

14

QOTM - Sponsored by Eddie Sanders Racing / Vote Now for December 2013 QOTM!!

« on: December 10, 2013, 05:37:18 AM »

[ATTACH=CONFIG]2634[/ATTACH][ATTACH=CONFIG]2635[/ATTACH][ATTACH=CONFIG]2636[/ATTACH][ATTACH=CONFIG]2637[/ATTACH][ATTACH=CONFIG]2638[/ATTACH][ATTACH=CONFIG]2639[/ATTACH][ATTACH=CONFIG]2640[/ATTACH][ATTACH=CONFIG]2641[/ATTACH]
here are a few pics of my hybrid.
engine- 496cc sabertooth
tranny- nate mccoy billet 1-5 override w neutral down
carb- 50mm lectron triple power jets with oversize bowl
pipe-shearer oof
chasis- 07 honda 450R frame, all bracing removed for weight reduction
swingarm- made by scotts atv one off +14 double arched aero tube chromoly
subframe- custom aero tube chromoly to match the swingarm
a-arms- +2/-1 single a arm chromoly
brakes- prototype brembo no drag caliper setup for 450r
axle- JJA alum drag axle
Paint- custom candy paint with twice hydro dipped graphics

15

For Sale - Parts / Billet Clutch Basket (New in box) $200 shipped

« on: August 24, 2013, 10:37:53 AM »

I bought a Wiesco basket and havent used it as of yet.. $200 shipped.. basket is new in the box. send me a PM or message me at CustomSeatsOfLouisiana @ facebook..