TRX250r.org

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - NCHondaKing

Pages: [1]
1
For Sale - Parts / Arens AC Nerf Bars, ASR +2 ST, Nacs Maier setup
« on: November 12, 2013, 09:11:48 PM »
AC nerf bars in great condition with fresh black nets. Teeth on footpegs are still very sharp. Came off of an Arens chassis and comes with front bracket and foot peg mounts. $165 shipped

ASR +2 standard travel aarms and tierods. I really good working order and heims and ball joints are tight. Have 2 sets of tierods to go with it. the powder coat is a little worn from gettting tied down but in over all good shape. $200 shipped

Maier plastics that are pretty fresh. A little scuff on the back that could be cleaned up from flipping over in the sand and a little 1 in crack right in the bottom corner where your right leg goes. Other than that they are beautiful low hour plastics. Graphics are fresh, comes with an extra new nacs seat cover for the seat. omf seat bracket. $350 shipped

Please just send me a text message for quick responce. 919-922-1110 thanks, Shane

[ATTACH=CONFIG]2296[/ATTACH][ATTACH=CONFIG]2297[/ATTACH][ATTACH=CONFIG]2298[/ATTACH][ATTACH=CONFIG]2299[/ATTACH]

2
updated...

3
Pictures are up on the other website and facebook of all parts.  please send me a text if interested in parts.  pictures do not want to work for me over here right now.

4
i bought it about 2 years ago and changed everything on it.  has not been out in a year though.  yes axle is adjustable from 0 to 4 if im not mistaken.  ok june.  im going to try and get everything taken apart tomorrow.  had no idea i would have this much interest in all of it.  has gotten confusing haha

5
Thanks Wayne!

6
Picture opens for me but i thought that it would just be up there to see not an attachment.  Does it not work for everyone else?  Send a message and i will text them

7
Yeah sorry, Goldsboro North Carolina.  hmm ill work on the picture problem

8
[ATTACH=CONFIG]1828[/ATTACH] [ATTACH=CONFIG]1829[/ATTACH] [ATTACH=CONFIG]1830[/ATTACH]

9
It will be the weekend before i can break the bike down and get detailed pictures. If you want to claim something you are more than welcome to paypal the money or a deposit until i get you a pic and i will return it if unhappy. gcwinstead@bellsouth.net is the account
Gonna part out my mx chassis.  Chassis is still together and not ready to ship anything until next week but just decided to do this so I figured that I would go ahead and put it out there.  Will get pics of everything but will post what i have now.  All prices are picked up.  Shipping is not included.  919-922-1110 Shane

SOLD*Arens frame and subframe, straight with original powder coat on it.  Im thinking it is a 2003* with 10hrs tops on it.  Sat on a stand in my buddies garage for over 10 years after being ran at 2 national races.  I bought the bike about 2 years ago and have barely trail ridden it.  comes with the AC nerf bars which were new with chassis and the foot peg teeth are still sharp and look new... thats how much time is on it.  $850

*Standard travel Elkas setup for B class 175lbs mx rider in great shape.  $450

SOLD*Flexx bars in great shape.  $200

SOLD*Chrome lonestar steering stem and arsfx fat bar clamp.  I think its stock length or +1.  $200

SOLD*Nice Afco thick polished radiator with A/N fittings.  $200

SOLD*Nice trx450r front end brake, spindle, hub setup.  Will come with everything complete.  Front master cylinder/lever, plus 2 braided brake lines, hubs, spindles, front brake calipers and disks.  Awesome upgrade works great and looks way better than stock.  $200

*Fresh ASR aarms all tight with all hardware and billet brake line clamps.  $200

*Works rear shock, clean and feels good.  150lbs mx valving.  $150

*Nice clean Maeir plastics with very little wear or scratches, fresh Nacs graphics and gripper seat with nacs cover.  Cover is in good shape but has a little bit of cracking from age on the very back on the Nacs decal but will come with an extra brand new matching Nacs cover and an omf seat latch.  $400

*Laegers -1 or 2 mx swingarm.  Not sure on the details of this but is in good shape and ready to go.  $250

SOLD*Durablue adjustable axle with billet sprocket hub and wheel hubs.  $150

SOLD*Trx450r rear brake conversion setup.  Stock 250r master cylinder, braided brake line, 450r rear caliper with block-off plate and modified brake stay.  $100

*Steering stabilizer.  $50

*Front and rear AC bumper/grab bar.  $75

10
For Sale - Parts / 250r hillshooter/drag Oem chassis setup
« on: September 10, 2013, 01:06:09 PM »
My number is 919-922-1110 if you want to contact me.

11
For Sale - Parts / 250r hillshooter/drag Oem chassis setup
« on: September 10, 2013, 01:05:20 PM »
sorry guys been gone for a couple days.  Like he said $800 for what is listed.  Sorry about that

12
For Sale - Parts / 250r hillshooter/drag Oem chassis setup
« on: September 03, 2013, 05:16:14 PM »
Comes with chrome drag aarms, lightened/polished 400ex aluminum spindles, chrome billet tierods, chromoly drag steering stem, Chrome +8 swingarm, ligthened oem 89 frame with custom subframe, front end, footpegs...

13
Suspension and Chassis / 250r,400ex,450r aarm compatability
« on: September 03, 2013, 05:09:32 PM »
I have a set of drag 400ex aarms on my 250r.  I have someone interested in them for there 450r but i dont think they will work.  Does anybody know what the difference is or if you can make a set of 400ex arms work on a 450r?  Thanks a lot.  Shane

Pages: [1]