Messages

1

Lounge / Laeger protrax spindle intrest?

« on: April 25, 2014, 02:57:21 PM »

Happy to see theres interest! I will post some info as soon as I hear something from the supplier.

2

Introductions / Quad builder/entusiast from Sweden.

« on: April 25, 2014, 02:53:21 PM »

Thanks everyone! I will post a thread as soon as I get started with the build.

And Troy I will send you a PM.

3

Lounge / Laeger protrax spindle intrest?

« on: April 24, 2014, 10:49:03 AM »

Hello, i'm "new" on this forum been on it looking since september 2013 and before that on .net

I have the opportunity to get a hold of machining new spindles that is a replica of the Laeger protrax spindle. The spindle will most likely use 7150 aluminium and be machined in a OKUMA multus B300-W.

I live in Sweden and there is a local business that I have been in contact with about doing a run.

If there is interest there is a big opportunity that there will be a run.

I have sent them measurements and will get a price for what I could expect it to cost to produce the spindles. The price I will get is for 1,5,10,15, and 20 pairs.

4

Introductions / Quad builder/entusiast from Sweden.

« on: April 24, 2014, 10:38:18 AM »

Hello, my name is Elias and I'm from Sweden.

I'm doing a new project quad build from scratch that will use the laeger narrow/protrax geometry (hopefully) with a gasgas ec300 engine.
I have always been a big fan of the trx250r but theres not a lot of them in Sweden.
Instead I now have a W-tec eraser evo from 2006 that I've been using the gasgas engine in but am now switching to a kx500 engine.

5

Suspension and Chassis / Laeger narrow measurements/or drawing.

« on: April 24, 2014, 01:45:28 AM »

I would be glad if someone could help me get as many measurements as possible. Haven't had a "normal" geometry quad in the garage since 2012.

I would highly appreciate if someone could get me measurements of the a-arm mountings, shock mounts front and rear, swingarm mounts, suspension rake in the front and measurements for the steering stem. And if it's possible some measurements of a set of +4+1 a-arms and a no-link swingarm.

I would be very happy if someone took the time to do that for me. It would be a very kind thing to do. And I would without hesitation help you guys with anything you need. Like if I could get a line of protrax spindles fabricated.

6

Suspension and Chassis / Laeger narrow measurements/or drawing.

« on: April 23, 2014, 02:47:21 PM »

Seen that thread before when searching for the frame measurements. Very helpful info

7

Suspension and Chassis / Laeger narrow measurements/or drawing.

« on: April 23, 2014, 01:51:08 PM »

Hello, does anyone have any info into building your own chassis? Been looking into building a replica of a Laeger narrow frame with a no-link setup. But the problem is that i can't find any measurements or drawings of the frame.

I have all the info I need to machine my own protrax spindles.

The main reason for the project is that I have a gasgas ec300 engine that is standing on the shelf after switching engine in my last build.

I'm from Sweden by the way.