Messages

1

Carburetor, Intake, and Exhaust / trx5b on a OEM cylinder

« on: June 04, 2014, 05:04:50 AM »

I think the only thing different in the pipe is just where the silencer slips on its a little bit bigger cuz to flow a little more through the pipe , you should be fine running the 5b on an oem cylinder

2

Carburetor, Intake, and Exhaust / Jetting baseline for 350 Sphynx

« on: May 27, 2014, 03:39:54 AM »

Is that a 2nd gear launch failure or bearing failure ... That pic made my stomach turn ...

3

Carburetor, Intake, and Exhaust / Jetting baseline for 350 Sphynx

« on: May 23, 2014, 09:35:11 AM »

If u can get ur hands on some other needles wouldnt be bad either , hopefully ur electrical isnt cutting out on you

4

Carburetor, Intake, and Exhaust / Jetting baseline for 350 Sphynx

« on: May 23, 2014, 01:34:07 AM »

Got mine idling currently its a 50 pilot around 2 turns out on air screw , tbone if u havent done it already try cutting 2-3 coils off ur idle screw to make it go in a bit further just a suggestion ....

5

Carburetor, Intake, and Exhaust / Jetting baseline for 350 Sphynx

« on: May 22, 2014, 07:26:07 PM »

I used lots of silicone in the first joiint kinda built a gasket in there then let it set up for 10 mins or so also put a little around the exhaust flange and on all the reat of the pipe joints and let it sit for 24 hrs it seems to have seal up nothings leaking but i cant get the thing to idle so its only been run about 2-3 mins total

6

Carburetor, Intake, and Exhaust / Jetting baseline for 350 Sphynx

« on: May 22, 2014, 01:12:16 AM »

Arlan said 48-50 pilot , start 182 main , ddj needle middle clip , i tried a 58 , 55, 53 pilot have no idle on any of them and last time my a/s was out 3 turns off and wasnt idling up , i have tried a 50 and 48 nothing seems to work i had it kinda idling with a 55 but it was turned to far out idled for maybe 10 secs the died so put in 53 and still no idle ,,, at this point the carb is smArter then me

7

Carburetor, Intake, and Exhaust / Jetting baseline for 350 Sphynx

« on: May 21, 2014, 07:17:18 PM »

How do u like that pipe , i got the same one , ur soecs close so mine other then mines esr and rad valve with fiber reeds , let me know how u make out i cant get mine to idle unless giving it some throttle gonna try a 55 pilot for the heck of it and play with the air screw and idle screw

8

LED Performance / Honda TRX250R Exhaust Systems

« on: May 18, 2014, 05:27:20 AM »

My buddy got the same pipe i guess i should have waited cuz the new ones got a sweet LED badge on them looks great , for fitting this pipe fit good its close to the frame in the front but it doesnt touch , touches the inner rad hose that connects from the head to the clutch cover , very happy with this pipe cant wait to here what it sounds like and arlans a great guy to talk to and happy to help in any way he can..

9

LED Performance / Honda TRX250R Exhaust Systems

« on: May 18, 2014, 05:22:39 AM »

Not shure is this will work its my new LED 350G pipe mounted but my phones actin weird not uploading

10

Suspension and Chassis / Who makes these a-arms ??

« on: May 11, 2014, 03:29:05 AM »

So iam better off just shimming them tight and look to buy another set ones that u can get parts for on a regular bases , that sucks iam still buildin this thing havent even got to ride it since the tear down

11

Suspension and Chassis / Who makes these a-arms ??

« on: May 07, 2014, 10:12:42 PM »

Thanx man , from what i been reading id be better off putting my money towards new arms them wasting it on bushings that he will never send or they come 6 months later

12

Suspension and Chassis / Who makes these a-arms ??

« on: May 07, 2014, 09:19:12 PM »

Thanx alot guys anyone know if i need to use the burgard bushings or other company bushinhs will work

13

Suspension and Chassis / Who makes these a-arms ??

« on: May 07, 2014, 11:19:53 AM »

Is there any way to know for shure what i have would suck buyin new bushings and it not fitting , or do u think just putting in a flat washer to take up thw lilttle slack would be fine

14

Suspension and Chassis / Who makes these a-arms ??

« on: May 06, 2014, 10:11:52 AM »

Would be nice to know just to get some new bushings its been a work in progress and i cant remeber what the guy said the was laeger and lsr come to mind but could have been a dream for all i know lol

15

Suspension and Chassis / Who makes these a-arms ??

« on: May 06, 2014, 04:28:15 AM »

Got these from a guy awhile ago just getting them on my R now and seems they dont fit really tight there is some back and forth play in there maybe just bushings need to be replaced or perhaps there for a 400ex
Also the balljoints dont have holes in them for a couter key they just have lock nuts on them ..