Messages

1

Projects / My Re-builds That are on Going

« on: February 11, 2016, 07:16:29 PM »

That looks really nice, are u going to have it ready for bako in two weeks...?

2

Introductions / Newbie from central Cali! 86 trx250r

« on: January 29, 2016, 05:44:37 PM »

One thing you need to remember, on that bike, it has 02 cr ignition, has a 01 stator adapter plate, I had to slot the hell out of the stator and adaptor plate to set timing in the correct place, this was done before Esr started making 02 to 07 cr style adapters, if u ever pull the stator off mark everything for reassembly or it will never run right, FYI

3

Introductions / Newbie from central Cali! 86 trx250r

« on: January 29, 2016, 05:22:25 PM »

Nothing that I know of, if I remember right that pipe had a pretty good dent in it in the front when he was having ignition problems before he swapped out to cr style ignition, a place up north that can repair that pipe fairly cheap and make it look like new, keep a lot of chrome polish on hand,ha ha

4

Introductions / Newbie from central Cali! 86 trx250r

« on: January 29, 2016, 04:15:50 PM »

Yes, it came from bakersfield, it belonged to a friend of mine, I sold him the pipe and swingarm, I rebuilt the topend on it about three years ago and helped put the cr ignition on it,

5

Introductions / Newbie from central Cali! 86 trx250r

« on: January 29, 2016, 04:14:43 PM »

Yes, it came from bakersfield, it belonged to a friend of mine, I sold him the pipe and swingarm, I rebuilt the topend on it about three years ago

6

Introductions / Newbie from central Cali! 86 trx250r

« on: January 29, 2016, 03:57:14 PM »

First of all I would like to say welcome to the forums, second I recognize that bike it belong to a friend of mine for a few years, good score..

7

Drag Racing / Bakersfield Sand Drags Feb. 25-28th

« on: December 29, 2015, 11:20:55 PM »

I hope a couple of pro pooped and flowed show up, always use more tow vehicles.

8

Drag Racing / Bakersfield Sand Drags Feb. 25-28th

« on: December 29, 2015, 10:32:52 AM »

I will be there, made a couple of changes to the bike, should be a great time.

9

Engine and Bottom End / ESR Cases

« on: December 22, 2015, 10:20:42 PM »

I have assembled a couple of engines with Esr cases, had absolutely no problems with them,I know several other people that run his cases no problems with them, I do not know anything about the black anodized cases or how they will hold up.

10

Drag Racing / 300ft setup

« on: July 06, 2015, 04:44:19 PM »

Johnny, everyone that runs that track is about 2 or 3 tenths slower than any other track around. A dry sand track compared to a groomed dirt track with moisture in it will make a huge difference, I"ve raced you before nothing wrong with you"re setup, Just a slow track........!!!!!

11

Introductions / hello to all 250r lovers

« on: June 10, 2015, 06:50:15 PM »

Welcome to the forum, by far the best on the Internet .

12

Carburetor, Intake, and Exhaust / hooking up vacuum fuel pump

« on: April 24, 2015, 12:44:53 PM »

I just plug one off.

13

Engine and Bottom End / Cometic copper base gasket torque

« on: April 12, 2015, 08:13:29 PM »

I'm not sure in the torque on a solid copper base gasket, but I am wondering what  is any advantage to using copper when there is very little pressure in crank case ...?

14

Drag Racing / Bakersfield Race Feb 27th - March 1st Info

« on: March 03, 2015, 08:52:04 PM »

Hey Russ, I talked to the guy with the bdt motor in the lanes, Really clean bike, I think the was from king city,  Nice guy but was not happy with it, He had already talked to Scott Spanel about a rebuild, with more porting and different dome......!

15

Drag Racing / Bakersfield Race Feb 27th - March 1st Info

« on: March 03, 2015, 08:31:45 PM »

I had a great time at the drags this year. Got to see some old faces and meet some new people, alot of great people on the forums, I got my old heap to run a 4.71 with my 215lbs ass on it, I was hoping for a 4.6 but I"m happy with that et out of a esr 347 cc , Can't wait to do it again.....