TRX250r.org

Author Topic: What do you guys use for quad stands?  (Read 5209 times)

Offline switchrider

What do you guys use for quad stands?
« on: March 04, 2014, 10:30:53 PM »
I'm looking to get a new stand, I want something that gets the bike a far ways off the ground so I don't kill my back all the time for general cleaning and such. What do you guys use?

Sent from my ADR6350 using Tapatalk 2


Offline Fire1

What do you guys use for quad stands?
« Reply #2 on: March 04, 2014, 11:21:58 PM »
Harbor freight motorcycle lift


Offline havinnoj

What do you guys use for quad stands?
« Reply #3 on: March 05, 2014, 08:21:28 AM »
I have a motorcycle jack that I bought from Costco 10 years ago like this:

Offline Burns363R

What do you guys use for quad stands?
« Reply #4 on: March 05, 2014, 08:27:12 AM »
I made cheap ones.  I wish i could buy a actual electric lift.


TRX 363R 02- Laeger Narrow Frame/CR500 Link, Motowoz Suspension, Roll Design +4 LT Arms,RPM Dominator +4 axle, LED 363 MX, LED 350G Pipe, 38 A/S CR Ignition

TRX 370R 86- Laeger Std,ISF-No Link Swinger, JD MGC LT Arms) Motowoz Shocks, LED 370/350D pipe, 38 PWK Carb, CR Ignition

Offline sameltoe

What do you guys use for quad stands?
« Reply #5 on: March 05, 2014, 10:20:22 AM »


Well none other than my pumastand...
Arens, Arsfx, BHP363
Arens, lsr dc2 no link, lsr dc4, BHP363

Offline etccb

What do you guys use for quad stands?
« Reply #6 on: March 05, 2014, 10:42:36 AM »
I always wanted to install a air lift in the floor like the cycle shops have. The wifes car would park right over the top of it and when time to use it you hook up the air line and go.

Offline Burns363R

What do you guys use for quad stands?
« Reply #7 on: March 05, 2014, 11:46:19 AM »
When is Tony going to make more of those stands.  I want a couple.
TRX 363R 02- Laeger Narrow Frame/CR500 Link, Motowoz Suspension, Roll Design +4 LT Arms,RPM Dominator +4 axle, LED 363 MX, LED 350G Pipe, 38 A/S CR Ignition

TRX 370R 86- Laeger Std,ISF-No Link Swinger, JD MGC LT Arms) Motowoz Shocks, LED 370/350D pipe, 38 PWK Carb, CR Ignition

Offline C-Leigh Racing

What do you guys use for quad stands?
« Reply #8 on: March 05, 2014, 12:26:39 PM »
I'm a old poor boy, so I use a 5 gallon bucket with the lid on at the races. Quickest & easiest thing you ever sat a 4 wheeler on & because of the cup shape to the lid, you can rotate the quad around like you want.
In the shop, I got a home made lift kinda like Fire1 has.
Used the big air operated type car bumper jack, extended the front part of the feet & lift part & made it into a table wide enough & long enough for a quad to roll up onto. Just hook the air hose up, press the lever & up she goes. Table sits just a bit lower than my waist belt.

Fire, that lift table, how long does it take to jack it up & does that big hole in the table come like that or you cut it in yourself.
Been intending to get one of those for a while now, add to the shop, but Harbor Freight is 55 miles away & dont trust my ol pickup to go that far.
Thats right, my ol pickups ragged, spit, pop, skip, bump & has the dark blue & gray "Ford Quality Job One" paint job on it with rust everywhere where the paints popped off :thread_hijacked:. One thing about it though, I dont have to worrie bout gitting jacked at a stop light, they hit them rich looking folks next to me.
Neil
C-Leigh Racing, in memory of Caraleigh Pritchard
Race team for 2015
Chuckie Creech #25 TRX450R, Pro, Pro Am, Pro Am Unlimited
Andrea Creech # 25 TRX450R, Womens (National ATVA EDT)
Andrea Creech #33 TRX350R, Womens (local EDT)

If it aint got a hot weed eater 2 stroke engine, all its good for is a pit bike

Offline nico

What do you guys use for quad stands?
« Reply #9 on: March 05, 2014, 02:34:38 PM »
I just use an old AC Racing aluminum X-stand.  It is a good height, but does require lifting the front of the atv up to slip the stand underneath.  It can also be tricky getting the "hooks" at the right spot for my bikes with stretched swingarms.

Offline fast350r

What do you guys use for quad stands?
« Reply #10 on: March 05, 2014, 02:46:18 PM »
X2 on the 5 gallon buckets ,
Shearer 431 puma

Offline fast350r

What do you guys use for quad stands?
« Reply #11 on: March 05, 2014, 02:47:02 PM »
Quote from: Fire1;27824
Harbor freight motorcycle lift


Oh man that 450r trike is beautiful
Shearer 431 puma

Offline Dirt man

What do you guys use for quad stands?
« Reply #12 on: March 05, 2014, 03:47:20 PM »
I like the bucket cause you can stack them and go higher. They also don't scratch your frame. I've been meaning to screw some legs on a bucket to make it more stable.
It goes fast over bumps too!

Offline jcs003

What do you guys use for quad stands?
« Reply #13 on: March 05, 2014, 03:59:42 PM »
those puma-stands are badass.  i want one.

john

 

Sitemap 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38