Author Topic: Resi mounts??? (Read 5716 times)

Goose · « **on:** June 24, 2016, 11:35:54 PM »

What is everyone using for resi mounts on their stock frames?
I have some of the rubber's with hose clamps currently that are starting to crack. So, before I got replacements for them figured I'd ask.
I'd like a different setup but not having much luck searching online.

I shot pummashine a pm but haven't heard back, so I figured I'd throw this in here.

dem3500 · « **Reply #1 on:** June 25, 2016, 07:39:38 PM »

Pumashine is your best bet. I've used them in the past and I have them on my daughter's ride. Currently I use the rubbers and 1/2" zip ties. Holds them tight and won't trash your powder. I'll probably order another set from pumashine this winter

walz · « **Reply #2 on:** June 25, 2016, 07:42:10 PM »

Please let me know if Pumashine hooks you up. That's the only one I could find and I was planning to measure my resi's next week before contacting him.

Goose · « **Reply #3 on:** June 25, 2016, 10:30:34 PM »

I'll definitely let you know what he says. Maybe if we get enough interest he'll make some more.

If we want it he will build it....or something like that hahaha

Skeans1 · « **Reply #4 on:** June 25, 2016, 11:36:55 PM »

Quote from: Goose;68443

I'll definitely let you know what he says. Maybe if we get enough interest he'll make some more.

If we want it he will build it....or something like that hahaha

If you make fun of Tony or anything along the lines he won't do business with you [MENTION=9]Pumashine[/MENTION] he's a good guy and treat him as so.
Jared

Goose · « **Reply #5 on:** June 25, 2016, 11:45:46 PM »

Wasn't trying to make fun of anyone.

Was more of a joke. Like field of dreams (the movie) "if you build it they will come"

Not sure how that could have been taken in any way derogatory, but no malicious intentions behind it.

Figured if enough people were interested he may be willing to make a run of em is all.

Pumashine · « **Reply #6 on:** June 26, 2016, 12:19:42 AM »

Just measure the rezi diameter and PM the size and if they go on stock frame or after market. Thanks guys

walz · « **Reply #7 on:** June 26, 2016, 12:19:56 AM »

No disrespect intended. Just hoping pumashine jumps in.

walz · « **Reply #8 on:** June 26, 2016, 12:21:31 AM »

Thank you sir, as soon as I see my bike ill measure and pm. Thanks!

Goose · « **Reply #9 on:** June 26, 2016, 02:07:23 AM »

Quote from: Pumashine;68446

Just measure the rezi diameter and PM the size and if they go on stock frame or after market. Thanks guys

PM sent, thank you sir, you are the man.

Fear250r · « **Reply #10 on:** July 01, 2016, 10:59:04 PM »

I'm using some old school Gibson resi mounts.

Tony would definitely be who I would look to if I needed some.

walz · « **Reply #11 on:** July 17, 2016, 02:15:13 PM »

Sent a PM about 10 days ago, no reply. Need four 2 1/4" mounts for square (87) frame please.

Pumashine · « **Reply #12 on:** July 17, 2016, 04:45:12 PM »

Quote from: walz;68836

Sent a PM about 10 days ago, no reply. Need four 2 1/4" mounts for square (87) frame please.

I can't keep up. The jet is down for a week for cleaning. I will cut yours and the ones [MENTION=1492]Goose[/MENTION] wants ASAP

havinnoj · « **Reply #13 on:** July 25, 2016, 12:06:16 AM »

Curious question - I've never ran remote rezzi's - always ran piggybacks or nothing. I swapped to a set of remote rezzi's - can I just hose clamp the rezzi directly to the frame? Or need some rubber there? If these shocks work out, I'll move to something more secure.

zcarlson12 · « **Reply #14 on:** July 25, 2016, 11:29:22 AM »

I always try to put something in between the can and the frame. I just take an old radiator hose and cut a piece to go around the frame rail for a cushion then hose clamp the can to the frame. Not sure if it's needed but piece of mind. One day I'll get a set of Tony's clamps.