Author Topic: gasket remover on powder coat? (Read 2789 times)

Victork · « **on:** October 06, 2013, 11:04:55 PM »

Has anyone used gasket remover to take powder coat off?

jamieg45 · « **Reply #1 on:** October 07, 2013, 11:21:00 AM »

I haven't tried that before but I use aircraft stripper. You can buy it in a spray can or a full gallon and brush it on, and it will take powder coating off. Let it sit on for a bit scrub with a wire brush and power wash it off, that is what I have done and it has worked.

Victork · « **Reply #2 on:** October 07, 2013, 12:43:36 PM »

Where can i buy it jamie?

Fire1 · « **Reply #3 on:** October 07, 2013, 01:54:13 PM »

Depending on what part you want to remove it from you can take a torch and move it back and forth and the powder will begin to flake and when you hit it with bead blaster it comes off like nothing.

Victork · « **Reply #4 on:** October 07, 2013, 02:18:30 PM »

A arms and tie rods. The guy doing the powder said his sandblaster isnt removing it

Victork · « **Reply #5 on:** October 07, 2013, 02:39:30 PM »

I thought about buying new arms and selling mine but im gonna finish mine. Mine are +2 +1 lsr race arms. 75 for mirror black powder, 316 for ALL new hardware...

Fire1 · « **Reply #6 on:** October 07, 2013, 02:52:11 PM »

Give the torch method a try. When the powder get hot enough it converts back to powder and the sand blaster should knock it right off.