Keihin PWK Throttle Valve #6 Slide

[F-Red]

I'm looking for a #6 slide for a Keihin PWK. Anyone have a good used one? Thanks.

[F-Red]

Nobody has spare slides, laying around? :uncomfortableness:

[4WHLr]

First post here but maybe I can help ya. I've got a spare #5, but dont know how richer the low end would be, if you have a 7 now. You could try it if you wanted.
Bill

[hontrx265r]

Try a richer diameter needle. It is the same effective tuning range as the cutaway, and much cheaper for experimentation. Needles on amazon are like 6 bucks. For instance if you are a dgj you would go dgh..

[F-Red]

First post here but maybe I can help ya. I've got a spare #5, but dont know how richer the low end would be, if you have a 7 now. You could try it if you wanted.
Bill

I appreciate the offer. That would probably be, too rich. It wasn't a real need, just wanted to see if I could feel and hear a difference.

Try a richer diameter needle. It is the same effective tuning range as the cutaway, and much cheaper for experimentation. Needles on amazon are like 6 bucks. For instance if you are a dgj you would go dgh..

The cutaway comes in to affect, right after the pilot. And supposedly, through the mid-range. Wanted to try the #6. Your right, these slides new are pricey!

[4WHLr]

No problem, Your post reminded me I had one in my spare stuff. The 5 is the standard slide for the 36 Quad Vent I'm running. I checked feebay to see what some prices are on them and the coc has no less than 24 listings for them! Over 80 bux for em too. :pig:

[Maxxh2o]

Shit for 80$ I have a 41mm Pwk with a #6 in it for not too much more than that.....well maybe a little more