Author Topic: ESR 310PV cyliinder...need input (Read 3541 times)

JoePA · « **on:** February 20, 2014, 12:43:46 PM »

Before I pull the trigger on this any input? It looks like an early casting that I heard possibly had issues.

JoePA · « **Reply #1 on:** February 20, 2014, 12:49:35 PM »

yes. Really for a new PV cylinder with 2 domes. Whats a good price?

rablack21 · « **Reply #2 on:** February 20, 2014, 12:50:00 PM »

If you could get it for a great price, then I would say do it. But I would also consider getting they new pv instead of that one. It was the early stage pv's that had problems. I've heard of no one that has had an issue with the new adjustable pv. If it is the one Jon ^^^^ is talking about, that is too expensive for that.

JoePA · « **Reply #3 on:** February 20, 2014, 12:54:03 PM »

OK, I knew there were issues with the early ones just wasn't sure.

rablack21 · « **Reply #4 on:** February 20, 2014, 01:02:47 PM »

Quote from: JoePA;26243

yes. Really for a new PV cylinder with 2 domes. Whats a good price?

Let's compare the numbers:
A brand new one runs $759 (with online discount) just like this one with YOUR choice of domes. During the Christmas season, they usually drop down to $699 for a short period of time. I bought a dome recently to go up to race game, I think it was $65.
This kit for sale still doesn't include an exhaust flange or the spacer plate.

Still think this is a good deal?

Kevhes11 · « **Reply #5 on:** February 20, 2014, 01:12:38 PM »

To play both sides though, it's 100 more for the port work

rablack21 · « **Reply #6 on:** February 20, 2014, 01:21:48 PM »

Quote from: Kevhes11;26248

To play both sides though, it's 100 more for the port work

That is true. I did miss that part.

etccb · « **Reply #7 on:** February 20, 2014, 01:31:55 PM »

If I was going to spend 759.00 I would also look at going this way to see if I could $$$ work it out. If it don't $$$ work it don't work but I would ask myself the question.
http://www.eddie-sanders-racing.com/product_p/330-76mm-stroker-kit-npv.htm
You get the case mod free with this if you send in bare cases. You can also add a pv to this setup at a later date if you like.

Kevhes11 · « **Reply #8 on:** February 20, 2014, 01:42:24 PM »

Quote from: etccb;26251

If I was going to spend 759.00 I would also look at going this way to see if I could $$$ work it out. If it don't $$$ work it don't work but I would ask myself the question.
http://www.eddie-sanders-racing.com/product_p/330-76mm-stroker-kit-npv.htm
You get the case mod free with this if you send in bare cases. You can also add a pv to this setup at a later date if you like.

Case mod is free you just gotta pay eddies return shipping... Which ain't ever cheap lol.

etccb · « **Reply #9 on:** February 20, 2014, 01:58:50 PM »

But every other builder will charge you $90.00 to $100.00 plus return shipping so it is still a great deal. A big number to plug in as you add things up and decide what you want to do anyway. Just something to think about.

Tbone07 · « **Reply #10 on:** February 20, 2014, 03:04:02 PM »

That seems like a high price for a used cylinder. I'd save a few more benjamins and get one of the brand new kits from ESR