Author Topic: Air box lids (Read 3704 times)

muthahucker · « **on:** April 15, 2014, 12:11:44 PM »

Does anyone still make the aftermarket airbox lids for both the ATC and TRX that will let you run a K&N prefilter on the top lid?
Thanks

ytman · « **Reply #1 on:** April 16, 2014, 06:30:23 AM »

EHS Racing may be what you're thinking of. Kind of a lot of dough tho.

sameltoe · « **Reply #2 on:** April 16, 2014, 10:09:40 AM »

Pumashine has made a few of the rings, but you need to buy the outerwares material...

Pumashine · « **Reply #3 on:** April 16, 2014, 10:26:02 AM »

Quote from: sameltoe;31647

Pumashine has made a few of the rings, but you need to buy the outerwares material...

I have one kit left for the ATC.

Onski326 · « **Reply #4 on:** April 16, 2014, 10:53:06 AM »

I just cut the middle out of mine and am using a section of one of those reusable Heat/AC filters that are washable. Works super! Been using them for years. Never smoked a motor yet.

The_Steve_Man · « **Reply #5 on:** April 16, 2014, 12:17:55 PM »

Cut the middle out and put panty hose around it.

Not the best looking but it does work

Pumashine · « **Reply #6 on:** April 16, 2014, 02:27:18 PM »

I made up some kits. Ring, nuts and bolts so you could cut a hole in the lid, drill through the existing holes in the ring as a guide. Get a piece of material for a screen and bolt it together for cheap. I think I sold them for $20 shipped. EHS was not making them anymore I believe. This one is for the ATC

mrtwidster1 · « **Reply #7 on:** April 17, 2014, 07:32:36 AM »

^^^^ PM sent Tony

Pumashine · « **Reply #8 on:** April 17, 2014, 08:56:44 AM »

Quote from: mrtwidster1;31720

^^^^ PM sent Tony

Last kit sold! I just got the airbox lid with a hole cut in it on my 450r. Just use the bag over the K&N.