Author Topic: Custom Axis Shocks (Read 3418 times)

Deuce · « **on:** July 06, 2013, 12:01:03 AM »

I have the following shocks for sale...

Axis rear shock for no link type setups. 17" center to center and set up for 180 lbs I believe (hard to tell since the numbers have faded and been rubbed off the springs). Overall in good shape but should probably be freshened up because I am unsure of the time on it. Biggest flaw is blemishing from rubbing on the reservoir can (see last picture).

$320 Shipped

Deuce · « **Reply #1 on:** July 06, 2013, 12:03:08 AM »

First generation front shocks which were rebuilt recently with all new updated seal heads and are ready to rock. They are sprung and valved for 210 - 220 lbs mx on +3 arms. I had the work done by Colby at C&D racing. These have 0 hours on them since they were rebuilt and all I had them on was my 89 roller which never made it past that phase (I don't think I even torqued the bolts down when they were on).

$720 shipped through usps (usually will take only 3-4 days max to get from me to you)

tretimit16 · « **Reply #2 on:** July 09, 2013, 11:37:56 PM »

I can't believe there's no takers... Ive seen these go on ebay for up to $900

Deuce · « **Reply #3 on:** July 10, 2013, 01:13:20 AM »

That makes two of us...

Tyler 54 · « **Reply #4 on:** July 10, 2013, 02:39:41 AM »

what length swing arm is the no link shock good for?

Deuce · « **Reply #5 on:** July 10, 2013, 10:08:52 AM »

If I recall correctly 17.5 - 18.5" but she should be serviced anyway so get it set up for you while doing that

Deuce · « **Reply #6 on:** July 12, 2013, 08:10:09 PM »

Front shocks SOLD!!!!

Now lets get that rear shock moving

Tyler 54 · « **Reply #7 on:** July 12, 2013, 08:29:37 PM »

^^ Waiting to hear back about a swing arm....