Author Topic: caliper rebuild (Read 3261 times)

Holt · « **on:** February 14, 2015, 09:28:29 PM »

Does anyone do caliper rebuilds? If so how much? There seized up and I can't get them loose. Its for my ATC.
Thanks
Holt

thesmith87250r · « **Reply #1 on:** February 14, 2015, 10:47:05 PM »

what cant ya get loose ? pins for brake pads. and what calipers ya need might have them pm me. mine are from a 85.

Holt · « **Reply #2 on:** February 15, 2015, 07:45:51 AM »

Pistons are locked up.

KASEY · « **Reply #3 on:** February 15, 2015, 09:04:32 PM »

I can rebuild them or sell you a good working one,, your choice ..

Holt · « **Reply #4 on:** February 15, 2015, 09:49:17 PM »

Kasey I will be getting in touch about rebuilding them in the next few weeks

Morse250r · « **Reply #5 on:** February 15, 2015, 10:15:31 PM »

To pop them out I know shooting grease in it will push them out. A grease gun has some crazy amount of pressure. My dad just did it on a barn find honda cb 350 1974

KASEY · « **Reply #6 on:** February 16, 2015, 10:57:38 PM »

I have a test bench setup with a porta power pump . that way I can test them and make sure they hold pressure overnight without leaking,,

Rupp250 · « **Reply #7 on:** February 17, 2015, 10:20:08 AM »

I had some spare calipers that had froze. I used a grease gun threaded onto the caliper. It pushed right out.