TRX250r.org
« previous next »
Pages: 1 [2]   Go Down

Author Topic: CR ignition flywheel weight  (Read 5367 times)

Offline Burns363R

Re: CR ignition flywheel weight
« Reply #15 on: February 18, 2020, 11:54:16 AM »
Just remember you loose alot of mass going to a CR250 flyshweel.  Even with the added weights, to the CR250 flywheel, you are no where near the rotational mass of the stock 250R.

For those of you that worry about not wanting to rev.   I will leave you with these.

https://www.youtube.com/watch?v=eTSrbfANv54

https://www.youtube.com/watch?v=ij6qlC-x9F0

Logged
TRX 363R 02- Laeger Narrow Frame/CR500 Link, Motowoz Suspension, Roll Design +4 LT Arms,RPM Dominator +4 axle, LED 363 MX, LED 350G Pipe, 38 A/S CR Ignition

TRX 370R 86- Laeger Std,ISF-No Link Swinger, JD MGC LT Arms) Motowoz Shocks, LED 370/350D pipe, 38 PWK Carb, CR Ignition

Offline Burns363R

Re: CR ignition flywheel weight
« Reply #16 on: February 18, 2020, 11:54:54 AM »
And just to top it off, Holeshots for days.

https://www.youtube.com/watch?v=W2Gcx2NKcf4
Logged
TRX 363R 02- Laeger Narrow Frame/CR500 Link, Motowoz Suspension, Roll Design +4 LT Arms,RPM Dominator +4 axle, LED 363 MX, LED 350G Pipe, 38 A/S CR Ignition

TRX 370R 86- Laeger Std,ISF-No Link Swinger, JD MGC LT Arms) Motowoz Shocks, LED 370/350D pipe, 38 PWK Carb, CR Ignition

Offline Michael88R

Re: CR ignition flywheel weight
« Reply #17 on: February 18, 2020, 12:43:47 PM »
Love the wheelie after the holeshot.  Looks like a heck of a lot of fun!
Logged
88’ R Esr 350 CEO, Esr trx5 pipe
88’ R Esr ported stock cylinder, waiting for rebuild when my son gets a little older

Offline rk88r

Re: CR ignition flywheel weight
« Reply #18 on: February 20, 2020, 10:38:14 PM »
I  run Steahly's on cr ignitions.
Logged
\'99 Laeger narrow, cr link, +3+1 protrax, Peps, with a LED 363
\'88 265 pv peps
One other \'88
Pages: 1 [2]   Go Up
« previous next »
 

Sitemap 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38