Author Topic: Thick ESR Reeds (Read 2434 times)

Goon250r · « **on:** August 20, 2013, 03:16:53 PM »

How thick are the new esr reeds? If I take my RB 2000 reed block add that thickness with a spacer I already have machined(just the spacer) to the exact thickness of the new esr spacers would that in turn give similar performance of the new thick esr reeds... or are they a whole design...

C-Leigh Racing · « **Reply #1 on:** August 20, 2013, 05:20:14 PM »

Take the old reed petals, cut off the bottom part, say leave a 1/2" long piece of the top with the screw holes & use the upper piece on top of the new reed petals.
That extra 1/2" piece lapped on top of the new reeds will stiffen the thin reeds & make them last longer & react faster like the stiffer & thicker reeds for high rpm porting.
Neil

Goon250r · « **Reply #2 on:** August 20, 2013, 06:44:18 PM »

Quote from: C-Leigh Racing;9330

Take the old reed petals, cut off the bottom part, say leave a 1/2" long piece of the top with the screw holes & use the upper piece on top of the new reed petals.
That extra 1/2" piece lapped on top of the new reeds will stiffen the thin reeds & make them last longer & react faster like the stiffer & thicker reeds for high rpm porting.
Neil

so just throw out the spacer all together

Goon250r · « **Reply #3 on:** August 20, 2013, 06:45:04 PM »

is the onlt diference in the new esr reeds is stiffer pedals