TRX250r.org

Author Topic: Adding another "R" to the stable!  (Read 6124 times)

Offline csides66

Adding another "R" to the stable!
« Reply #15 on: September 04, 2013, 02:25:16 PM »
Quote from: rsss396;11028
looks nice!, when you get it check it out real good and let me know what you want for it

Will do! I will need a seat so if your ok with it and all things good, id like to do a trade for your seat and we can talk about price difference.

Offline chrisr

Adding another "R" to the stable!
« Reply #16 on: September 04, 2013, 02:51:46 PM »
Not the same one I was talking about.  Thats a nice looking one your getting.
Let the good times roll............

Offline rsss396

Adding another "R" to the stable!
« Reply #17 on: September 04, 2013, 03:27:05 PM »
yeah we can do that, I have 2 both are in perfect shape just not stock
Anyone looking for a great builder I highly recommend the following.
For CP products dealers I would recommend:
Arlan at LED(site sponsor), Pete Schemberger at Hybrid Engineering, Mat Shearer at Shearer Custom Pipes, Dennis Packard at Packard Racing, and Nate McCoy of McCoys Peformance.

Other great builders I also would recommend: Neil Prichard, Jerry Hall, Bubba Ramsey and James Dodge.

Offline csides66

Adding another "R" to the stable!
« Reply #18 on: September 08, 2013, 02:04:34 PM »
Quote from: rsss396;11031
yeah we can do that, I have 2 both are in perfect shape just not stock

Well the seat had 3 small holes on it... There is an upholstry shop up the road from me i highly doubt they can fix it but im going to take it over to them anyway. The bike itself is in good condition but the seat was a little upsetting i got him to take another $200 off the price. The 89 plastic is good enough for rider plastic but thats about it, has some mounting hole damage one on side of front, could be race cut but  it looks like someone was crafty and drilled a new hole in what was left of the plastic mounting bracket. Got some ITP Baja rear 8" reinforced rims, gas tank no petcock.

Offline rsss396

Adding another "R" to the stable!
« Reply #19 on: September 08, 2013, 02:12:38 PM »
That ok, there is a shop that makes exact replicas of the 88 seat so I will just pick one of those up. It's hard to find a perfect 88 seat this many years later.
Anyone looking for a great builder I highly recommend the following.
For CP products dealers I would recommend:
Arlan at LED(site sponsor), Pete Schemberger at Hybrid Engineering, Mat Shearer at Shearer Custom Pipes, Dennis Packard at Packard Racing, and Nate McCoy of McCoys Peformance.

Other great builders I also would recommend: Neil Prichard, Jerry Hall, Bubba Ramsey and James Dodge.

Offline broken1

Adding another "R" to the stable!
« Reply #20 on: September 09, 2013, 12:22:14 AM »
Quote from: csides66;11027
Here are some pics of pics so they arnt very good... dont know whats up but it wont let me copy and paste...
[ATTACH=CONFIG]1727[/ATTACH][ATTACH=CONFIG]1728[/ATTACH][ATTACH=CONFIG]1729[/ATTACH]


That's a nice looking bike. If the R in these pictures is the one you just got than it's an 88 with oem fenders. 89's have white fenders with a red seat & tank.

Offline csides66

Adding another "R" to the stable!
« Reply #21 on: September 09, 2013, 08:51:17 AM »
Ya its an 88, the fenders were thrown in with the deal along with other odds and ends.

 

Sitemap 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38