Trikers! Post up pics of your 3-wheeled death machines!

[RIDE-RED 350r]

Those pics are beautiful christph! They look professionally done, like for a magazine ad! Nice job

[Robbie]

My 86 Tri-Z right before a monsoon hits.

[ATTACH=CONFIG]857[/ATTACH][ATTACH=CONFIG]858[/ATTACH][ATTACH=CONFIG]859[/ATTACH]

very cool pictures would have been awesome to catch one with lightning in the background!

[TatTooL23]

^^^ that would be very easy to add in photoshop.

[Rupp250]

Nice looking Christph

[JasonB]

I haven't been following did you get the 500 up and going?

yep its up and running! Took it to Trikefest in june as the first real 'ride' and it didnt do too bad over all. Doing alot of work on it this week; suspension101 has my rear shock and is doing a full rebuild/revalve/new spring on it. installed a new right radiator because a rock busted a hole in the old one. Made a new set of top motor mounts from 5052 3/16" aluminum plate because the motor ripped the old mounts in half lol. Installed an x-33 durablue axle and am ordering a 38mm cast smart carb this coming friday for it. Headed to the badlands for a ride weekend after this one, should be a good shake down to see what breaks. thanks for askin!

Tattool: if that was a question for me, i am running a 21" front on a 10" wheel

[pantera1975]

I run this tire on my ATC with the 3x3 off set 10 inch rim I really like it over the stock front tire.http://www.rockymountainatvmc.com/p/43/81/165/723/-/26017/ITP-QuadCross-XC-ATV-Tire?term=itp    22-7x10 6ply.

How much was your smart carb? How come you only using a 38mm I got a 39mm on my 330.

[yaegerb]

This is great, its like 3W.org and 3WW all in one.  Well, you guys know my trikes but I will post them anyway

[ATTACH=CONFIG]966[/ATTACH]      1984 200x flat track (218cc bruiser :devilish:)

[ATTACH=CONFIG]967[/ATTACH]      1985 250R "daily driver"...mechanically sound and all around fun :onthego:

[JasonB]

I run this tire on my ATC with the 3x3 off set 10 inch rim I really like it over the stock front tire.http://www.rockymountainatvmc.com/p/43/81/165/723/-/26017/ITP-QuadCross-XC-ATV-Tire?term=itp    22-7x10 6ply.

How much was your smart carb? How come you only using a 38mm I got a 39mm on my 330.

smartcarb was around 430$ with tax and shipping. that is for the pre-order on the cast version, not the billet one already out. I wont get mine until prob mid september if they release as scheduled mid august. Also, I went with the 38mm because that was the only one they offer for the cast version. no way i can stomach spending 800$+ on the billet one. even though its gorgeous lol. I have a 39pwk on my 500 now, but APT confirmed the 38mm would be just fine on this machine! Plus theres like 1 or 2 guys on the cr500 boards running the 38 billet carbs on their cr500 motors and have had great success!

[RIDE-RED 350r]

Didn't the CR500 come with a 38mm carb from the factory anyway?? Not saying bigger isn't better in this case, especially for drag running...... But the 38 should be adequate I would think....

[JasonB]

If you read up on the smart carb, they Even claim it atomizes the fuel more efficiently which in part leads to better hp gains. They claim like 8-10% hp gains. Compared to the old pj 38mm carbs these 500cc bikes came with, there should be significant gains

But ya 38mn is what they rolled out with. I'm so excited to get this

[bkm]

Almost finished.

[christph]

What is the length on that Westcoast swingarm, +3, +4?

[bkm]

its a +2

[ATC323R]

86 undergoing a restoration started it 3 weeks ago

[beobe99]

My TPC


I should have my new 250r ATC ready for pictures in a month or two. Still need a few items.

DAM!!!!!! Thing is so sick!