Author Topic: Is this a Hybrid too? (Updated) (Read 49605 times)

mrtwidster1 · « **Reply #75 on:** May 15, 2015, 07:55:30 PM »

Well i am in the process of touching up the polished parts starting the final assembly. The motor is finished waiting to ne installed.
My plan is to put a new hand coned pipe sized for the stroked 330 in the earlier pics. That should be my last major purchase until i buy a smart carb. Shooting for amid summer finish date.

mrtwidster1 · « **Reply #76 on:** May 25, 2015, 07:54:22 AM »

Little more progress

mrtwidster1 · « **Reply #77 on:** May 28, 2015, 08:41:11 PM »

My coil mount I made today.Going to add stainless fasteners. Test fit the tank and all is good. One more piece closer to the finish.

JesseA420 · « **Reply #78 on:** May 29, 2015, 07:21:22 AM »

beautiful work! i like your custom cut brake pedal

mrtwidster1 · « **Reply #79 on:** May 31, 2015, 08:39:34 PM »

Quote from: JesseA420;54796

beautiful work! i like your custom cut brake pedal

Thank you

mrtwidster1 · « **Reply #80 on:** May 31, 2015, 08:42:59 PM »

Little more progress. Got the CR ignition wired up.

mrtwidster1 · « **Reply #81 on:** July 18, 2015, 02:00:04 PM »

mrtwidster1 · « **Reply #82 on:** August 01, 2015, 02:21:44 PM »

Powder coated the light guard today

mrtwidster1 · « **Reply #83 on:** August 01, 2015, 02:25:01 PM »

Powder coated carbs. Going with the white the other is eastwoods chrome. i used the reflective chrome and will powder over the chrome (just the bowl and cap) with anodized red and if i like it I will use it on the white PWK 39mm.Should set it off.

mrtwidster1 · « **Reply #84 on:** August 03, 2015, 08:31:26 PM »

Probably need to fab some spacers to raise the lights

Not sure if i will use the red bowl on this carb.

mrtwidster1 · « **Reply #85 on:** August 14, 2015, 11:58:06 AM »

Hope to have it ready to start by this weekend.

Skeans1 · « **Reply #86 on:** August 15, 2015, 10:32:41 AM »

Looks good I really like the red bowl and cap just something different you don't see.

mrtwidster1 · « **Reply #87 on:** August 15, 2015, 06:59:31 PM »

Thanks

mrtwidster1 · « **Reply #88 on:** August 16, 2015, 11:30:22 PM »

Well I got it fired up this weekend. (I had to call in re-enforcement for a little tech advise though. Thanks Tim!)
Anyway it is up and running, I still have to break it in. Then I will get it dialed in. I am sure it will be a few weeks before I really get to ride it good.

mrtwidster1 · « **Reply #89 on:** August 22, 2015, 08:52:40 PM »

Still have a few items to finish up. The red tank is just temporary until my white desert tank is ready.
Still have to install the skid plates, and some other "thing's". But it fires right up and rides good. Really like the geometry of the USD fork conversion. Gives the bike a better "feel". Of course the modern suspension is nice.