Author Topic: My getting older, lifestyle change build. (Read 9599 times)

hontrx265r · « **on:** November 24, 2013, 04:33:25 PM »

Well the days of mxing a few times a week and running off weekend after weekend are over. I've sold a lot of my favorites and thought I was semi quad retired but could not resist a nice clean bike for a smoking deal so I picked up a full lsr framed bike locally. It has a dc2 no link and standard travel +2 front all lsr . Fully adj. Custom axis all the way around. Motor has some goodies esr 310 and a hinson quick change. Deals didn't come without issues though. Ended up overhauling the motor, Rebuilding all the shocks, replacing all the wheel and axle bearings, and ill continue to do more. My intentions are to go with more of a dune/trail /play bike as all of my builds have been mx. First think I did along with the overhaul of the motor was a dc lighting conversion, I installed a sweet 6in led bar and have ordered the rest of my parts for the system. I will build a super clean wiring harness this week that should make everything nice and tight. Stay tuned...

Motor just finished assembly this weekend.

hontrx265r · « **Reply #1 on:** November 24, 2013, 04:41:13 PM »

[ATTACH=CONFIG]2407[/ATTACH] day I picked it up

HAYESTRX250R · « **Reply #2 on:** November 24, 2013, 04:49:48 PM »

Nice looking ride, it's a keeper.

rk88r · « **Reply #3 on:** November 24, 2013, 05:39:27 PM »

tuned in

chrisr · « **Reply #4 on:** November 24, 2013, 05:41:17 PM »

Thats a nice lookin ride!

hontrx265r · « **Reply #5 on:** November 25, 2013, 10:36:33 PM »

[ATTACH=CONFIG]2432[/ATTACH]
Built this harness today split ac/dc system. Uses 3 pos switch with kill, has inputs for the reg/rec, batt, stator, and switch. Fused outputs for front/rear lights, one hot extra, one switched extra. And of course runs cdi, coil kill through ac system. Still need to label and terminate the connections tomorrow.

hontrx265r · « **Reply #6 on:** November 25, 2013, 10:40:12 PM »

[ATTACH=CONFIG]2433[/ATTACH]
Motor finding its home.

JasonB · « **Reply #7 on:** November 25, 2013, 11:13:30 PM »

Good machine to start with! In for results

hontrx265r · « **Reply #8 on:** November 25, 2013, 11:38:03 PM »

Thanks Dan, can't wait to finish it should work out good. It is a nice bike to start with. it was just due for a lot of service. My goal is to not get carried away. All the powdercoat is still mint, as well as the aluminum. For now ill leave it alone I've got some good ideas to work with the blue that I have to say I wasn't so excited about.

etccb · « **Reply #9 on:** November 26, 2013, 09:57:41 AM »

Looking Good!!
Sweet ride.

fast350r · « **Reply #10 on:** November 26, 2013, 12:19:51 PM »

clean looking motor man

jamieg45 · « **Reply #11 on:** November 26, 2013, 11:23:14 PM »

Looking good so far man, keep it up.

hontrx265r · « **Reply #12 on:** November 28, 2013, 10:43:29 AM »

[ATTACH=CONFIG]2444[/ATTACH]
[ATTACH=CONFIG]2445[/ATTACH]
Thanks for the compliments haven't gotten much done in a couple days. Waiting on bolts, I replaced a lot of generic stuff in vital points like arm mounting and motor mounts. Need to build a mount for battery and regulator. I'm also looking for an oversized tank in clear if anyone has one to sell please let me know.

hontrx265r · « **Reply #13 on:** November 28, 2013, 10:48:15 AM »

[ATTACH=CONFIG]2446[/ATTACH]
[ATTACH=CONFIG]2447[/ATTACH]

05450r · « **Reply #14 on:** November 28, 2013, 11:10:46 AM »

Looks good, like the harness/connectors, headaches savers right there!!