Author Topic: 86 R build white, red and black.. tons of photos.. (Read 17610 times)

patman13mia · « **Reply #15 on:** March 03, 2014, 03:17:16 PM »

sorry for the sideways pics.. i hope the moderator can fix that..

patman13mia · « **Reply #16 on:** March 03, 2014, 03:21:55 PM »

what i couldnt get on the press i cut out with a dremmel.. then took a pic with the cylinder on to see if i was touching anywhere.. i was on the sides so i removed even more of the cases with a dremmel.. hope these pics help ppl if they are boring out cases.. the work is easy. dont need to send them out to get bored.. save ya 100$ or so.. only thing that was a little challenge was i didnt have a rotating base for the drill press so i had to more it all by hand inch by inch.. made it more fun though!!

pinned250r · « **Reply #17 on:** March 03, 2014, 03:24:23 PM »

Holy cow, im impressed with this stuff, i'd love to have the means to pull this stuff off. Im digging your extra brace on the front of frame below the steering stem mount. looks cool. I am definitely going to do something crazy with the 86 i have laying around i think...its just a shame becuase its mint right now, i dont wanna screw something up.

trx88 · « **Reply #18 on:** March 03, 2014, 03:24:54 PM »

first time ive seen that!

patman13mia · « **Reply #19 on:** March 03, 2014, 03:25:47 PM »

ii got a great deal on a wiseco clutch basket.. heres the work i did to grind the rivets off the gear and them placed it onto the new basket.. pretty easy.. looks nice.. anybody run a wiseco clutch basket?? how do they compare to the hinson baskets? or barnett? i hope just about the same

trx88 · « **Reply #20 on:** March 03, 2014, 03:27:52 PM »

you might replace those bearings...

patman13mia · « **Reply #21 on:** March 03, 2014, 03:28:42 PM »

thanks dude!! the brace is apart or pumashines gussett kit. i got the best one i could for the 86. he did a great job making the parts.. they are cut so well im almost thinking he doesnt do them by hand anymore?? idk.. if so wow!!

patman13mia · « **Reply #22 on:** March 03, 2014, 03:30:28 PM »

ohh yea def gona replace the bearings!! lol.. already got em on order from honda east toledo!! oem all day!! i gota go back to work so ill post more pics up later on today.. keep following. my bike is a roller so i wana see what yall think i should do for colors in certain spots and all.

Pumashine · « **Reply #23 on:** March 03, 2014, 03:31:24 PM »

Quote from: patman13mia;27550

sorry for the sideways pics.. i hope the moderator can fix that..

Sideways is fine Pat, we are all used to it. It's the upside down that really screws me up. I just don't fall off my bike that much. Hope you got a hold of the paint shop. Don't need any primer on the motor. Urethane just looks like its wet all the time. Your harbor freight paint gun will work fine on the motor. Just needs to be about 60-70 degrees for the paint to lay flat

trx88 · « **Reply #24 on:** March 03, 2014, 04:19:12 PM »

i bought a wiseco for my 4mil im getting done up, theyre just the same ive heard. but time will tell.

guy actually recommended a wiseco

patman13mia · « **Reply #25 on:** March 03, 2014, 04:38:29 PM »

you talkin wiseco bearings?? see all the research ive done i just keep reading oem.. i already ordered about 70% of the bearings so ill just finish that out.. but in the future id be willing to try wiseco..

patman13mia · « **Reply #26 on:** March 03, 2014, 04:40:22 PM »

thanks pumashine.. i will have to go to the paint store on tues cause i have a 24 hour shift at work. im really excited to use this paint.. how does it hold up to gas and scratches?? compared to powdercoat??

Pumashine · « **Reply #27 on:** March 03, 2014, 04:56:22 PM »

Quote from: patman13mia;27567

im really excited to use this paint.. how does it hold up to gas and scratches??

PCing a bottom end is a pain. Gotta remove every bearing or it falls out anyway. I can take a pic of my old green motor. Its had gas on it for the last 6-7 years under the carb.... Still shiny Polyurethane is like rubber. It does not get sandblasted like my sisters PC'd frame

JTRtrx250r · « **Reply #28 on:** March 03, 2014, 07:00:35 PM »

Quote from: patman13mia;27540

cool dude im actually in everett wa stationed in the navy.. and i took my frame onto the ship to work on it.. got tons of tools there.. keep lookin out for photos i got really in depth with the work

haha, on the ship... that's awesome! Im not far from you, pretty much in the middle of Redmond-Carnation-Woodinville area. Good luck with the project!!

patman13mia · « **Reply #29 on:** March 03, 2014, 07:31:00 PM »

nice thanks for the pic.. exactly what i wanted to see.. i remember in like 2011 i read thru your whole write up on how to paint and how to polish.. i will do a step by step process on here with lots of pics and then maybe you can chime in on any more tips n stuff.. that way everybody can use this paint instead of rattle can paint thats gona chip so easy.. we can sticky that shit!!