TRX250r.org

Author Topic: Aftermarket Gears - Need Info on Teeth & Ratios for Yukon HD's & Baldwins  (Read 2830 times)

Offline havinnoj

I'm compiling gearing info and need to know whether the Yukon's and Baldwin gears were different from the OEM.  Right now I'm assuming they were the same as the later years but need to know for sure.  Besides Nate McCoy's billet transmission (which I have ratios for) and Arlan's new 250R tranny gears, I don't think there are any others aftermarket manufacturers.  Let me know if I'm missing one.

Offline 4WHLr

Aftermarket Gears - Need Info on Teeth & Ratios for Yukon HD's & Baldwins
« Reply #1 on: March 17, 2014, 10:05:30 PM »
I have a Baldwin set. Same ratio as stock 87-89. 2nd thru 6th countershaft only. Yukons were the same.
 I tried to get info on marks gears a couple of times, as far as material and so forth. I think all Marks plans went to Duncan/Yukon if I'm not mistaken.  I may have to go over and poke him personally to get some info.
They were $725 when I bought them from Mark.
« Last Edit: March 17, 2014, 10:21:21 PM by 4WHLr »
1986 TRX275R PC2000

Offline havinnoj

Aftermarket Gears - Need Info on Teeth & Ratios for Yukon HD's & Baldwins
« Reply #2 on: March 18, 2014, 09:06:01 AM »
Quote from: 4WHLr;29248
I have a Baldwin set. Same ratio as stock 87-89. 2nd thru 6th countershaft only. Yukons were the same.
 I tried to get info on marks gears a couple of times, as far as material and so forth. I think all Marks plans went to Duncan/Yukon if I'm not mistaken.  I may have to go over and poke him personally to get some info.
They were $725 when I bought them from Mark.

Thanks for the confirmation Bill.  I always thought Mark's gears were a bit different than the Yukon ones.. maybe not though.  That would be cool!  I remember when you could get a full Yukon set for under $300!  I still have an unopened set I can't quite make myself open up :D

Offline kb250r

Aftermarket Gears - Need Info on Teeth & Ratios for Yukon HD's & Baldwins
« Reply #3 on: March 18, 2014, 11:16:24 AM »
Quote from: havinnoj;29267
Thanks for the confirmation Bill.  I always thought Mark's gears were a bit different than the Yukon ones.. maybe not though.  That would be cool!  I remember when you could get a full Yukon set for under $300!  I still have an unopened set I can't quite make myself open up :D
\
Ok don't open them then,Ill give ya $600.00 and ill open them...lol
Atc - 350 6mill
Atc - 350 4mill
Trx - 431 puma

Engineered by C-Leigh Racing

Offline havinnoj

Aftermarket Gears - Need Info on Teeth & Ratios for Yukon HD's & Baldwins
« Reply #4 on: March 18, 2014, 12:18:37 PM »
Quote from: kb250r;29280
\
Ok don't open them then,Ill give ya $600.00 and ill open them...lol

Thanks for the offer but I'm keeping them :D

Offline C-Leigh Racing

Aftermarket Gears - Need Info on Teeth & Ratios for Yukon HD's & Baldwins
« Reply #5 on: March 19, 2014, 11:10:35 AM »
Quote from: havinnoj;29288
Thanks for the offer but I'm keeping them :D


Yeah, I know thats right, cause I know somebody else got a set & $600.00 wont get those either.
Neil
C-Leigh Racing, in memory of Caraleigh Pritchard
Race team for 2015
Chuckie Creech #25 TRX450R, Pro, Pro Am, Pro Am Unlimited
Andrea Creech # 25 TRX450R, Womens (National ATVA EDT)
Andrea Creech #33 TRX350R, Womens (local EDT)

If it aint got a hot weed eater 2 stroke engine, all its good for is a pit bike

 

Sitemap 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38