Author Topic: Arens PV265 Build (Read 13316 times)

bnau267 · « **on:** April 18, 2014, 09:28:49 PM »

I picked this frame up in the spring of 2013 from a guy in Kentucky. It's a really nice Arens XC frame. I originally built a MX bike but didn't ride it much so now I'm rebuilding as a XC bike. I'm leaving the frame as is for now.

bnau267 · « **Reply #1 on:** April 19, 2014, 12:41:20 AM »

Here's the power plant all freshened up with a new piston and rings. Low hour 88 bottom with a 265 PC2000 and Duncan pyramid. I have 01 CR ignition that I'll probably use on this.

sameltoe · « **Reply #2 on:** April 19, 2014, 03:22:17 AM »

Nice! Guess I didn't realize that arens made a xc and mx. ..

bnau267 · « **Reply #3 on:** April 19, 2014, 05:37:55 PM »

Quote from: sameltoe;31847

Nice! Guess I didn't realize that arens made a xc and mx. ..

They are pretty much the same thing if you ask me. John Arens called it a CC XC on Fbook so I went with it being that he made it. They are all XC's if you ask me.

havinnoj · « **Reply #4 on:** April 19, 2014, 05:42:55 PM »

Very cool. What color plastics / graphics are you going to run with the yellow frame?

Higgy87trx425 · « **Reply #5 on:** April 19, 2014, 05:58:50 PM »

I'd say go with Yellow you don't see alot of Yellow R's Suzuki ruined the color!!
Thanks Higgy

bnau267 · « **Reply #6 on:** April 19, 2014, 06:15:59 PM »

Quote from: havinnoj;31873

Very cool. What color plastics / graphics are you going to run with the yellow frame?

White fenders but not sure on graphics.

bnau267 · « **Reply #7 on:** April 20, 2014, 11:15:21 PM »

The one thing that I'm sure of is that I'll use these suckers on this build!

pinned250r · « **Reply #8 on:** April 21, 2014, 03:36:11 PM »

Yeah, use those suckers and sell me that brake pedal! lol.

Bob its almost riding season, you gonna have an R to ride this year?

bnau267 · « **Reply #9 on:** May 24, 2014, 02:34:19 PM »

Not much progress except for installing the stem and working out a deal to buy a roll standard link swingarm. Probably gonna bite the bullet and have the frame powdered along with the swinger. Then I'll install the new XC front end.

trx250scar · « **Reply #10 on:** May 24, 2014, 05:30:21 PM »

Quote from: bnau267;31841

Here's the power plant all freshened up with a new piston and rings. Low hour 88 bottom with a 265 PC2000 and Duncan pyramid. I have 01 CR ignition that I'll probably use on this.

I need this motor like the crops need the rain.

bnau267 · « **Reply #11 on:** May 24, 2014, 10:09:49 PM »

That sucker should be in action soon....

bnau267 · « **Reply #12 on:** June 03, 2014, 10:32:34 PM »

Roll MX out Roll XC in....

Flyin_250r · « **Reply #13 on:** June 03, 2014, 11:00:24 PM »

Man you have some sweet builds!

bnau267 · « **Reply #14 on:** June 04, 2014, 01:14:18 AM »

I finally have some noteworthy updates on the build. Installed the Roll front end, replaced the MX axle with an OEM, swapped out the rear shock, mounted up the wheels....I'm sticking with the old school look. I'm pretty sure this is the color scheme and I may just run my OEM fenders. The end is near. Oh yeah, I'll be running the stock shocks for a while or at least until I get the PEPs rebuilt.