Author Topic: Packard puma for sale (Read 4830 times)

Morse250r · « **on:** May 27, 2014, 11:05:40 PM »

439 Packard puma
Balanced and welded crank
Nate McCoy billet trans 1/5
CPI oof pipe
48mm lectron with dual feed bowl
Cases are mint no damages
Motor has very few passes on it.
3500

Can't load pics off phone for some reason. Can text or email them.

mandom250r · « **Reply #1 on:** May 27, 2014, 11:26:45 PM »

any 300ft times?

jadleybray · « **Reply #2 on:** May 28, 2014, 02:35:43 AM »

Few pics from other post

Morse250r · « **Reply #3 on:** May 28, 2014, 06:03:25 AM »

It ran a 4.4 with a smaller carb and with the chassis needing tuned. This motor has only a few passes on it and every time it was ran it was tuned on. Owner has a busy schedule and cannot put the time into tuning it. Packard said with a jockey and perfect tune should run 4.1/2's

Thanks for posting the pics !

mandom250r · « **Reply #4 on:** May 28, 2014, 08:49:54 AM »

Comes with CR ignition and lock up?

Sent from my LG-P999 using Tapatalk 2

Morse250r · « **Reply #5 on:** May 28, 2014, 07:18:33 PM »

Those items would be extra

Morse250r · « **Reply #6 on:** May 31, 2014, 08:41:30 AM »

Open to offers willing to makes deals including cr ign and lock out with the motor

Morse250r · « **Reply #7 on:** June 02, 2014, 08:41:52 PM »

Bump
Billet basket

rsss396 · « **Reply #8 on:** June 03, 2014, 08:22:43 AM »

You cant build one for this price, and Packard does great work.
Just because it has not went 4.0 does not mean it wont, chassis setup is much more important than most people think. You can put a saber in a MX chassis and it will more than likely be slower than a full drag setup 370 prox

Morse250r · « **Reply #9 on:** June 04, 2014, 01:37:15 PM »

oldschoolmx · « **Reply #10 on:** June 05, 2014, 07:26:48 AM »

Bump for a sweet setup.

Morse250r · « **Reply #11 on:** June 05, 2014, 08:09:39 PM »

Rupp250 · « **Reply #12 on:** June 05, 2014, 08:50:36 PM »

Where's it going?

Morse250r · « **Reply #13 on:** June 06, 2014, 10:26:49 PM »

El Paso