My Re-builds That are on Going

[Rupp250]

Well I figured I would chronicle the rebuild of a couple of my R's. I've slowly been collecting parts for a Drag/Dune bike. Had a lot of fun running it that way. but have recently picked up a dedicated drag chassis. Well it is still sitting 2hrs away for 3 months already paid for. So now I will have a dedicated Dune bike. I also picked up a stock 86 250r from a forum member back in April. This will be my trail bike.

So this bike will be going back to a Duner.

The plan so far is to run
363 Sphinx ported by Nate McCoy
ESR5CM piipe
+2 Arms
2+2 Durablue Axle I got from PortedR(AJ)
+1 Stem(Still need)
Aftermarket Stock Length SwingArm (Still need)
Works Shocks by Evan @ Schmidty Racing

I update the other stuff as I redo them.

This is the bike that will be staying fairly stock.

It will have
stock Cylinder setup by Nate McCoy
Works Shock from Scmidty

The drag Bike I will post pics and info as I get to it.
Wife is having our second son any day so racing and trips this year is done. My next ride will be Glamis for Newy Years and the drag bike should be ready for Bakersfield next year. Which is usually late March.

[Rupp250]

And dang if I just relized this wasn't posted in the project section. FML

[Bio86]

I may have some +2 +1 chrome asr's for sale shortly if you're interested. McCoy is a great guy, glad to see another die hard.

Looking forward to the end results, both look good already!!

[jcs003]

wow! rupp; the top pic was a realization of the power most drag racers are working with.  your pic clarifies the volume and tenasity these engines create.

john

[Rupp250]

Yeah Nate is a great guy. Someone I truly am grateful to know. It is nice that I am close enough to him to drive over to his house.

[Rupp250]

Oh and don't mind the dirty garage floor, it is stained. I need Jon to come through and strip/polish them up for me.

Also the diapers are not for me. Just to clarify.

[Rupp250]

Anyone have a 86 length after market swingarm they what to sale? How about a stem? I already have a anti-vibe mount.

[havinnoj]

And dang if I just relized this wasn't posted in the project section. FML

Moved it for you.  And subscribing for the updates!

[Rupp250]

We need a random pic area.

[Rupp250]

I have plenty of stuff to update this with. Just have to get some pics and descriptions. But here is a random. Maybe next project? That is my Sphinx head on it for comparison.

[Rupp250]

Here is where I am at now. Chassis is raw, got it back from the sand blaster. Just have to mock everything up. But, that is a little hard to do since I am working 15 days straight. I'll do a better job of taking pics and posting up going forward though.

[Rupp250]

Here are the other bikes. The Sphinx is ready to go back into the white bike. Then later this year that one will be torn down and powdered as well.


Plus been busy playing with this as well.

[Usmoneylover]

Shweet....on all accounts, what's the upper and lower ya got there

[Rupp250]

Its nothing special.
Here is the upper. I picked it up during black Friday deals for $207 shipped. The lower is a Tactical Machine 80%. This will be just a cheapie paper puncher.

http://www.shopdiamondback.com/upper-receivers/5-56-complete-upper-reciever-with-10-5-rail-black-anodized-db15r-uppc105

[Rupp250]

went out in the garage today and did a little tinkering with the duner. Took the baby motor out and put in the Sphinx. Changed up the motor setup from alky to pump gas. Also went from vforce3 to a see of ESR reeds. Also putting on a stator set up for a lighting circuit.