TRX250r.org
« previous next »
Pages: [1] 2   Go Down

Author Topic: Burns363R 2015 MX bike build.  (Read 6758 times)

Offline Burns363R

Burns363R 2015 MX bike build.
« on: February 18, 2015, 09:26:17 AM »
Well its that time of year, parts are coming in the door. Bike is about to be reassembled. I hope to have the frame this week, so i will be posting more on it later in this thread. But for now here are my new Silver Fullbores and new SSI decals graphics installed.

Also what to thank all my sponsors for the 2015 year.

BDT motorsports
RRR (Root River Racing)
SSi Decals
Maul Tech Suspension
Rath Racing
Fourwerx Carbon
Oneal
SVK

The bike is a 2001 (i think) Laeger Narrow CR500 Link frame. It has +4 Roll Design Long Travel arms with 400ex spindles and adapters to run 250r calipers. The front shocks are Custom Axis triple rate Comp/Reb Adjust done by Maul Tech. The rear is a Laeger Swing arm with CR500 linkage and a single rate Custom Axis comp/reb adjust done by Maul Tech.

The motor is a BDT ported Sphynx 363 stroker motor with a custom Wurks pipe and a 40.5mm Airsryker carb.





Logged
TRX 363R 02- Laeger Narrow Frame/CR500 Link, Motowoz Suspension, Roll Design +4 LT Arms,RPM Dominator +4 axle, LED 363 MX, LED 350G Pipe, 38 A/S CR Ignition

TRX 370R 86- Laeger Std,ISF-No Link Swinger, JD MGC LT Arms) Motowoz Shocks, LED 370/350D pipe, 38 PWK Carb, CR Ignition

Offline Burns363R

Burns363R 2015 MX bike build.
« Reply #1 on: February 18, 2015, 09:27:06 AM »





Logged
TRX 363R 02- Laeger Narrow Frame/CR500 Link, Motowoz Suspension, Roll Design +4 LT Arms,RPM Dominator +4 axle, LED 363 MX, LED 350G Pipe, 38 A/S CR Ignition

TRX 370R 86- Laeger Std,ISF-No Link Swinger, JD MGC LT Arms) Motowoz Shocks, LED 370/350D pipe, 38 PWK Carb, CR Ignition

Offline Burns363R

Burns363R 2015 MX bike build.
« Reply #2 on: February 18, 2015, 09:27:36 AM »



Logged
TRX 363R 02- Laeger Narrow Frame/CR500 Link, Motowoz Suspension, Roll Design +4 LT Arms,RPM Dominator +4 axle, LED 363 MX, LED 350G Pipe, 38 A/S CR Ignition

TRX 370R 86- Laeger Std,ISF-No Link Swinger, JD MGC LT Arms) Motowoz Shocks, LED 370/350D pipe, 38 PWK Carb, CR Ignition

Offline Burns363R

Burns363R 2015 MX bike build.
« Reply #3 on: February 18, 2015, 09:28:20 AM »
Some pics of the 450R fenders.



Logged
TRX 363R 02- Laeger Narrow Frame/CR500 Link, Motowoz Suspension, Roll Design +4 LT Arms,RPM Dominator +4 axle, LED 363 MX, LED 350G Pipe, 38 A/S CR Ignition

TRX 370R 86- Laeger Std,ISF-No Link Swinger, JD MGC LT Arms) Motowoz Shocks, LED 370/350D pipe, 38 PWK Carb, CR Ignition

Offline Burns363R

Burns363R 2015 MX bike build.
« Reply #4 on: February 18, 2015, 09:29:04 AM »
The 450R front fenders are actually a bit different. I changed the graphics for the front fenders because i have the incorrect ones installed on the outside.  I need to update my pics.
Logged
TRX 363R 02- Laeger Narrow Frame/CR500 Link, Motowoz Suspension, Roll Design +4 LT Arms,RPM Dominator +4 axle, LED 363 MX, LED 350G Pipe, 38 A/S CR Ignition

TRX 370R 86- Laeger Std,ISF-No Link Swinger, JD MGC LT Arms) Motowoz Shocks, LED 370/350D pipe, 38 PWK Carb, CR Ignition

Offline Burns363R

Burns363R 2015 MX bike build.
« Reply #5 on: February 18, 2015, 09:31:21 AM »
I'm planning on powder coating the 3 springs on the front shocks.  The main spring will be candy blue.  The middle spring will be black, the top spring will be silver.   All my anodized parts will be done today, so there should be a lot of progress. on it.  I hope to have it all done but the shocks by this weekend.
Logged
TRX 363R 02- Laeger Narrow Frame/CR500 Link, Motowoz Suspension, Roll Design +4 LT Arms,RPM Dominator +4 axle, LED 363 MX, LED 350G Pipe, 38 A/S CR Ignition

TRX 370R 86- Laeger Std,ISF-No Link Swinger, JD MGC LT Arms) Motowoz Shocks, LED 370/350D pipe, 38 PWK Carb, CR Ignition

Offline JesseA420

Burns363R 2015 MX bike build.
« Reply #6 on: February 18, 2015, 09:46:04 AM »
i love the color, those roll a arms are longggggggg
Logged
Quote from: Hawaiiysr;66760
Yup i sucked the head. taste like dirt.

[/FONT]

Offline Burns363R

Burns363R 2015 MX bike build.
« Reply #7 on: February 18, 2015, 10:07:56 AM »
Ya the front end is 49.5" with the +4 arms 4:1 rims and narrow frame.
Logged
TRX 363R 02- Laeger Narrow Frame/CR500 Link, Motowoz Suspension, Roll Design +4 LT Arms,RPM Dominator +4 axle, LED 363 MX, LED 350G Pipe, 38 A/S CR Ignition

TRX 370R 86- Laeger Std,ISF-No Link Swinger, JD MGC LT Arms) Motowoz Shocks, LED 370/350D pipe, 38 PWK Carb, CR Ignition

Offline Burns363R

Burns363R 2015 MX bike build.
« Reply #8 on: February 18, 2015, 01:26:25 PM »
Anodizing is complete. It turned out a little lighter than i wanted but should look good. may even add some contrast.  

Logged
TRX 363R 02- Laeger Narrow Frame/CR500 Link, Motowoz Suspension, Roll Design +4 LT Arms,RPM Dominator +4 axle, LED 363 MX, LED 350G Pipe, 38 A/S CR Ignition

TRX 370R 86- Laeger Std,ISF-No Link Swinger, JD MGC LT Arms) Motowoz Shocks, LED 370/350D pipe, 38 PWK Carb, CR Ignition

Offline rablack21

Burns363R 2015 MX bike build.
« Reply #9 on: February 18, 2015, 05:48:58 PM »
Looking sharp Kyle! I noticed you got a new set of holeshots. You not running the DWT's anymore? I think I'm about to switch back to holeshots myself. Nothing else I've tried hooked up quite as well as the holeshot did.
Logged

Offline zcarlson12

Burns363R 2015 MX bike build.
« Reply #10 on: February 18, 2015, 06:59:00 PM »
Looks awesome Kyle. I really like the front number plate shape on the R hood.
Logged
Laeger 310R

Offline Tbone07

Burns363R 2015 MX bike build.
« Reply #11 on: February 18, 2015, 07:16:07 PM »
Hmm I like that anodizing.....what's the cost comparison vs. powder coating?
Logged
LED Performance 350R
Laegers-JD Performance-GThunder-HLS-PEP-HiPer-GBC

RIP Laz

Offline Burns363R

Burns363R 2015 MX bike build.
« Reply #12 on: February 18, 2015, 08:06:50 PM »
Ya I like the new ITP fronts. They loom mean. I have always been a hole shot guy. The DWT ' S were great. But not reversible. I'm trying some changes for this season. I think this will be a key for my program.

The anodizing was free for me. But I'm not to happy with the color. May be trying a different color. I was holding for a closer match.
Logged
TRX 363R 02- Laeger Narrow Frame/CR500 Link, Motowoz Suspension, Roll Design +4 LT Arms,RPM Dominator +4 axle, LED 363 MX, LED 350G Pipe, 38 A/S CR Ignition

TRX 370R 86- Laeger Std,ISF-No Link Swinger, JD MGC LT Arms) Motowoz Shocks, LED 370/350D pipe, 38 PWK Carb, CR Ignition

Offline Tbone07

Burns363R 2015 MX bike build.
« Reply #13 on: February 18, 2015, 10:18:02 PM »
Quote from: Burns363R;50416
The anodizing was free for me. But I'm not to happy with the color. May be trying a different color. I was holding for a closer match.

I agree. They look a little too much like baby blue, while your frame is more of a candy
Logged
LED Performance 350R
Laegers-JD Performance-GThunder-HLS-PEP-HiPer-GBC

RIP Laz

Offline Burns363R

Burns363R 2015 MX bike build.
« Reply #14 on: February 21, 2015, 04:44:25 PM »


Logged
TRX 363R 02- Laeger Narrow Frame/CR500 Link, Motowoz Suspension, Roll Design +4 LT Arms,RPM Dominator +4 axle, LED 363 MX, LED 350G Pipe, 38 A/S CR Ignition

TRX 370R 86- Laeger Std,ISF-No Link Swinger, JD MGC LT Arms) Motowoz Shocks, LED 370/350D pipe, 38 PWK Carb, CR Ignition
Pages: [1] 2   Go Up
« previous next »
 

Sitemap 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38