Author Topic: Ct duner project (Read 28251 times)

mandom250r · « **Reply #30 on:** April 21, 2015, 01:10:58 PM »

400ex brake calipers with HEL lines. New 10x4 drag cut douglas blue label wheels with Skat Trak mohawks. Right side bolted up perfect but the left.......

mandom250r · « **Reply #31 on:** April 21, 2015, 01:18:22 PM »

WTF!!!!

After some grinding on my new wheels and CT bumper install the front end is finally complete

mandom250r · « **Reply #32 on:** April 21, 2015, 01:26:34 PM »

89 swingarm with new PRM duner skidplate and UPP chain guide. Waiting on the bracket that holds the guide

These are pics from friday i had to work all weekend and didnt have a chance to update this. Yesterday i found that the skidplate is too short and rubs the brake rotor. Stayed up all night monday and got a lot done so ill update later today.

JesseA420 · « **Reply #33 on:** April 21, 2015, 02:33:28 PM »

Quote from: mandom250r;53276

just ended up loosing my right leg lol

is this typo or did u really lose ur leg from that crash?

mandom250r · « **Reply #34 on:** April 21, 2015, 03:18:25 PM »

Quote from: JesseA420;53430

is this typo or did u really lose ur leg from that crash?

no i really did lose it. Broke my femur in 3 and ripped off right at the calf. Havent rode anything since so hopefully i get this done by this weekend. Went and bought 4 gallons of 110 yesterday just to make sure.

JesseA420 · « **Reply #35 on:** April 21, 2015, 03:47:06 PM »

holy crap man. that is crazy. was it a machinery malfunction or operator error?
did you waller out the holes on your wheel to adapt to your bent hub lol?

mandom250r · « **Reply #36 on:** April 23, 2015, 02:09:57 AM »

On friday i had put the swingarm on so naturally i wanted to make it a complete roller so i stayed up all night monday wrenching. This is what i felt like with that damn lock ring. My fault for not having some good tools but it got me so frustrated it made me move on to other parts of the bike.

mandom250r · « **Reply #37 on:** April 23, 2015, 02:26:31 AM »

I did all this monday night. Motor has a 200w ricky stator and flywheel so i just went with a OEM harness to make it easier. Later i will install the CR ignition.
IMS tank i borrowed from my desert build. I bought a blue IMS from atv galaxy but IMS has to make it since they dont have any in stock so its going to take a while for me to get it.
IMS tank has a Pingel valve
New ESR 9 centermount pipe
Polished rear master cylinder with Hinson brake lever

ESR centermount with LED intake fits!!!!

Keihin 40.5mm carb

ASV clutch with Motion Pro cable, OEM light/kill switch, polished Terrycable throttle with Motion Pro cable

mandom250r · « **Reply #38 on:** April 23, 2015, 02:31:47 AM »

First thing i do tuesday morning is go to auto zone and buy me some heavy duty lock ring pliers and took me 2 seconds to install that damn ring.

JJ&A play axle, 37 tooth Renthal sprocket and LSR light weight brake rotor. Took the skid plate off

mandom250r · « **Reply #39 on:** April 23, 2015, 02:41:19 AM »

Ok so axle is done and wheels are on.Time to put the pegs on and jump on it, make some brapping noises and imagine how my arms are going to be ripped off here soon. Then this happens

WTF!!!!! Brake pedal is in the way and no room for the pegs.

mandom250r · « **Reply #40 on:** April 23, 2015, 02:46:46 AM »

Im desperate and need answers NOW!!! So i call LSR and they say "our frames are made to accept stock components". Ok good thing i have a spare OEM brake pedal laying around. I install and then i get this. AHHHHHHHH!!!!

It still hits!!!

mandom250r · « **Reply #41 on:** April 23, 2015, 02:54:50 AM »

Anyway good thing im a bad ass and i install some aluminum spacers i had laying around and made it work.

Forgot to take more pics but the rear brake is on and i installed the kicker and filled her up with VP 110 and some Castor 927. Made a quik run through and tightened everything up and BRAAAAAAAAPPPPPPPPPP!!!!!

SHE LIVES!!!! Sounds beautiful and the smell brought back so many memories. My garage hasnt smelled like that in over a year.

mandom250r · « **Reply #42 on:** April 23, 2015, 02:57:21 AM »

Today wednesday i got the chain installed so tomorrow morning i will throw on some fenders, tighten some stuff up and go for a quik ride.

JesseA420 · « **Reply #43 on:** April 23, 2015, 07:07:23 AM »

ping ping ta ping ping pa pa pa ping ping pa pa ping ta ping ping ping

bholzgen · « **Reply #44 on:** April 23, 2015, 01:58:30 PM »

This may be a stupid question, but what pedal do you have to run on that chassis then?