Author Topic: Need good transmission (Read 8845 times)

Trx428r · « **on:** April 19, 2015, 11:24:37 AM »

Does anyone have a good 88-89 trans or 85-87 trans in good shape they would like to sell? Or can anyone recommend anyone that sells transmissions? I'm working on a 431 puma build and am having trouble finding a good set of gears.

Skeans1 · « **Reply #1 on:** April 19, 2015, 01:22:17 PM »

Is it just a few gears or do you need a whole transmission?

Trx428r · « **Reply #2 on:** April 19, 2015, 02:09:02 PM »

I'll check with my builder this week, he said everything was pretty rough, have to see how much I really need

Pumashine · « **Reply #3 on:** April 19, 2015, 02:22:32 PM »

Dale the seller on ebay's Dirt factory parts out many 250r's. you can get a whole tranny for $200 then get if magnufluxed and Cryo'd for a little more.

Trx428r · « **Reply #4 on:** April 19, 2015, 08:12:44 PM »

Quote from: Pumashine;53317

Dale the seller on ebay's Dirt factory parts out many 250r's. you can get a whole tranny for $200 then get if magnufluxed and Cryo'd for a little more.

Thank you I will try them, just have had bad luck from random sellers on ebay

Pumashine · « **Reply #5 on:** April 19, 2015, 08:39:32 PM »

Quote from: Trx428r;53336

Thank you I will try them, just have had bad luck from random sellers on ebay

Another member here [MENTION=498]312R1[/MENTION] has really nice 250r parts for sale now and then

Trx428r · « **Reply #6 on:** April 20, 2015, 12:47:48 AM »

Quote from: spiritaces;53338

I wish I knew this yesterday. I have 3 nice transmissions. Too late now i left town for work

Let me know when you get back I'm working on 2 builds might still need one. Thank you.

Trx428r · « **Reply #7 on:** April 20, 2015, 12:49:43 AM »

Quote from: Pumashine;53337

Another member here 312R1 has really nice 250r parts for sale now and then

Thank you i will keep an eye out

Tbone07 · « **Reply #8 on:** April 20, 2015, 12:23:37 PM »

Does LED still have the reinforced countershaft gears? You might want to look into some tougher ones for the Puma.

312R1 · « **Reply #9 on:** April 20, 2015, 06:41:18 PM »

Thanks Tony,
I'm all cleared out until this winter. Back to work now.

Trx428r · « **Reply #10 on:** April 20, 2015, 08:31:00 PM »

I found a set of new yukons and plan on cryo treating them, think they will hold up vs led 1-3

Pumashine · « **Reply #11 on:** April 20, 2015, 08:36:08 PM »

Quote from: Trx428r;53374

I found a set of new yukons and plan on cryo treating them, think they will hold up vs led 1-3

I been running 2 puma's for 6 years now on stock tranny's. Blew 2nd on one of them. Lil epoxy and another $150 tranny is a good fix.

Trx428r · « **Reply #12 on:** April 21, 2015, 10:23:09 PM »

Quote from: Pumashine;53375

I been running 2 puma's for 6 years now on stock tranny's. Blew 2nd on one of them. Lil epoxy and another $150 tranny is a good fix.

Maybe I'm worrying too much if stock is holding up good for you. Do you cryo treat your stock trannys?

Pumashine · « **Reply #13 on:** April 21, 2015, 10:55:45 PM »

Quote from: Trx428r;53493

Maybe I'm worrying too much if stock is holding up good for you. Do you cryo treat your stock trannys?

Not until this 486 I am putting together now. Most important is to get first and second back cut so they do not slip out of gear when taking off.

Trx428r · « **Reply #14 on:** April 22, 2015, 01:04:47 AM »

Quote from: Pumashine;53496

Not until this 486 I am putting together now. Most important is to get first and second back cut so they do not slip out of gear when taking off.

I have to Ask what is the 486? Is it based off a puma cylinder? And what is the bore and stroke? I have two transmissions coming so should be good for gears now with yukons. Already have some shiny stuff from you just need a reason to bolt it on. Just lost interest in the polonda.