Author Topic: Laeger Narrow No-link Build (Read 16403 times)

jamieg45 · « **Reply #15 on:** August 10, 2013, 11:49:51 AM »

Is it a stock set up cut short or full on harness, if its a full on harness I can post pics of how to run it and if its a short harness o can post pics of that also. Well excuse me I can text them I currently don't have a computer to do squat and need someone to post pics for me. Jon was sappose to for some stuff that I have for sale but he hasn't done it just yet. Here is my cell if you need pics man 269-362-2458

zcarlson12 · « **Reply #16 on:** August 10, 2013, 04:58:16 PM »

Got the pipe on and some other misc. stuff. Jamie- I txtd you sir.

zcarlson12 · « **Reply #17 on:** August 18, 2013, 12:04:37 PM »

Update: Plastic is just sitting on there and some other things still aren't done but it started on the third kick and sounds really good. Started breaking it in yesterday and hopefully finish it today.

Pumashine · « **Reply #18 on:** August 18, 2013, 12:15:37 PM »

Great looking R, glad you got the wiring figured out. Let her rip!

Sky · « **Reply #19 on:** August 18, 2013, 12:21:07 PM »

nice job.

jamieg45 · « **Reply #20 on:** August 18, 2013, 03:37:04 PM »

Looks good man, I lime the old school nacs graphics

red88r · « **Reply #21 on:** August 18, 2013, 03:45:37 PM »

Wow that thing looks great. Really clean and love the Nac's graphics. Good job putting her together!

zcarlson12 · « **Reply #22 on:** August 18, 2013, 09:10:31 PM »

Thanks everyone. The wiring was way easier than I was making it, still not sure why I thought it was so complicated haha. Does anyone just route the overflow hose down the frame rail to dump on the pipe or the ground? I'm thinking as a temporary fix until I get a Walsh bottle but I was just curious to what other people are doing.

05450r · « **Reply #23 on:** August 18, 2013, 09:17:22 PM »

Looking good! The Walsh bottle is just a Polaris Predator bottle,cheap on ebay but until then just run it to the ground and keep an eye on the coolant! Do you know what length Laeger uses for the no-link shock? I need to measure the one on my Houser still.

zcarlson12 · « **Reply #24 on:** August 18, 2013, 09:23:58 PM »

I thought that would be fine, thanks 05. I don't know the exact length but I can measure it tomorrow and let you know.

05450r · « **Reply #25 on:** August 18, 2013, 09:37:11 PM »

Sounds good,thank you!

zcarlson12 · « **Reply #26 on:** August 21, 2013, 09:00:33 PM »

05450R I completely forgot to measure that shock, I'll get that for you tomorrow. Does anyone have a picture of the front fenders mounted without the hood? I'm trying to figure out where the front fender mounts connect to the fenders and all that. Thanks.

05450r · « **Reply #27 on:** August 21, 2013, 11:52:15 PM »

No rush,whenever you get time. There should be a threaded hole on both side of the frame just forward of the upper shroud mount,your mounts will bolt to those.

zcarlson12 · « **Reply #28 on:** August 22, 2013, 06:10:36 PM »

05- I didn't have time to take the shock all the way off but ride height length is 17.5" eye to eye. If you need me to take the shock off for the full measurement just let me know and I can this weekend.

Here are some more pics from today just going over everything and double checking before the maiden voyage. Still waiting on my grab bar and I need to get bolts for the nerfs, a "pin style" seat latch ( let me know if you have one to part with ) and a few other things. Who am I kidding they are never really done.

05450r · « **Reply #29 on:** August 22, 2013, 06:19:00 PM »

Looking good!!... No need to take the shock off,the ride height measurement will work,thank you! Im looking for a different rear shock and was just wondering what a Laeger used compared to a Houser.