Author Topic: What's it worth? (Read 31608 times)

trx363_Hunt · « **Reply #105 on:** December 31, 2015, 10:57:02 AM »

Yes on dirt. Although the r is not even setup for dirt drags and it's stock chassis extended 4inches.

Sent from my LG-H810 using Tapatalk

Victork · « **Reply #106 on:** December 31, 2015, 10:58:31 AM »

What's the low down on the banshee I'm curious

trx363_Hunt · « **Reply #107 on:** December 31, 2015, 11:00:12 AM »

Both of my quads are setup more for the dunes actually. The banshee has a full chromoly frame.

Sent from my LG-H810 using Tapatalk

hickwheeler · « **Reply #108 on:** December 31, 2015, 11:01:40 AM »

From the pic you have posted the r doesn't look to have a extended swinger on it.

trx363_Hunt · « **Reply #109 on:** December 31, 2015, 11:04:00 AM »

Sent from my LG-H810 using Tapatalk

trx363_Hunt · « **Reply #110 on:** December 31, 2015, 11:06:29 AM »

Quote from: hickwheeler;62618

From the pic you have posted the r doesn't look to have a extended swinger on it.

I don't have a side pic of it but it is stretched.

Sent from my LG-H810 using Tapatalk

trx363_Hunt · « **Reply #111 on:** December 31, 2015, 11:16:37 AM »

The banshee is a 10 mil twister crank. 72.2mm pistons. Pro-x monoblock with Pro-x head. Drag ported. 39 pwk a/s. 110 race fuel. Direct drive lockout. 2-5 override. Ct racing drag pipes. Needed new top end when I took it to the shop and still dynoed 100hp. Waiting for the new numbers, should be done this week.

Sent from my LG-H810 using Tapatalk

Victork · « **Reply #112 on:** December 31, 2015, 11:23:28 AM »

Nice I like it. One of my main riding buddies is a she's guy and has a 10mill dm and a 18 mill dm, he's talking about getting a serval cub now lol the 10 mill dm dynod 125hp and is the fastest bike I rode(didnt ride the 18mill). All his stuff is red line racing. The problem is they only go fast in one direction and I often feel like I'm riding alone because he can't keep up with me

trx363_Hunt · « **Reply #113 on:** December 31, 2015, 11:30:14 AM »

Quote from: Victork;62622

Nice I like it. One of my main riding buddies is a she's guy and has a 10mill dm and a 18 mill dm, he's talking about getting a serval cub now lol the 10 mill dm dynod 125hp and is the fastest bike I rode(didnt ride the 18mill). All his stuff is red line racing. The problem is they only go fast in one direction and I often feel like I'm riding alone because he can't keep up with me

I agree I love the way the r handles. Its a lot smoother than the shee in the turns. The shee has Marvin shaws and I tell you those are some nice shocks!

Sent from my LG-H810 using Tapatalk

Saber569r · « **Reply #114 on:** December 31, 2015, 11:31:22 AM »

You should of went dm or cub. My bro bought twister would never run right.

Skeans1 · « **Reply #115 on:** December 31, 2015, 11:36:20 AM »

Quote from: Saber569r;62624

You should of went fm or cub.twisyersseemro be a lot less power.100 hp out of a 10 mil? U can get that out of a 4mm.

Those Twister small blocks have a lot in them too.

trx363_Hunt · « **Reply #116 on:** December 31, 2015, 11:43:28 AM »

This is a build from the 90s guys. Its still putting out some good power.

Sent from my LG-H810 using Tapatalk

trx363_Hunt · « **Reply #117 on:** December 31, 2015, 12:43:00 PM »

What times are you running with the sphinx in 300ft.

Sent from my LG-H810 using Tapatalk

Saber569r · « **Reply #118 on:** December 31, 2015, 04:12:23 PM »

Never timed one, I'll be doing some sand drags this weekend I'll have them time me. If she runs like she sounds, she should put down a good number. Thanks again Jared can't wait to run her.

trx363_Hunt · « **Reply #119 on:** December 31, 2015, 04:38:59 PM »

Well the shee should be running low 4s high 3s if it hooks up!

Sent from my LG-H810 using Tapatalk