Author Topic: 44mm lectron on a 363 sphynx? (Read 14673 times)

Saber569r · « **on:** January 04, 2016, 08:52:20 AM »

Maxed out my jetting done at hassy drags, got to a 220 and still felt lean. Would 44mm lectron be a better set up? I only run the hill and straight drags.

Skeans1 · « **Reply #1 on:** January 04, 2016, 09:02:44 AM »

Quote from: Saber569r;62866

Maxed out my jetting done at hassy drags, got to a 220 and still felt lean. Would 44mm lectron be a better set up? I only run the hill and straight drags.

That'd work or run a smart carb on that motor like I did

Saber569r · « **Reply #2 on:** January 04, 2016, 09:20:45 AM »

Quote from: Skeans1;62867

That'd work or run a smart carb on that motor like I did

Been thinking about getting the smart carb but 38 might be too small. Can a smart carb be bored to 40.5? That be the way to go?

Skeans1 · « **Reply #3 on:** January 04, 2016, 09:26:05 AM »

Quote from: Saber569r;62869

Been thinking about getting the smart carb but 38 might be too small. Can a smart carb be bored to 40.5? That be the way to go?

I ran a billet 40 with a Q05 rod
https://technologyelevatedco.com/product-category/large-billet-smartcarbs/

Rupp250 · « **Reply #4 on:** January 04, 2016, 10:05:59 AM »

Quote from: Saber569r;62866

Maxed out my jetting done at hassy drags, got to a 220 and still felt lean. Would 44mm lectron be a better set up? I only run the hill and straight drags.

Are you running Alky? What carb do you have now? If on 110 that 220 is huge compared to what my 363 ran. 0Ft of elevation, 40.5mm Kehein, Shearer OOF, VF3 I was running below a 170 main I think.

Quote from: Skeans1;62867

That'd work or run a smart carb on that motor like I did

You run alky through the Smart Carb?

Skeans1 · « **Reply #5 on:** January 04, 2016, 10:16:53 AM »

Quote from: Rupp250;62872

Are you running Alky? What carb do you have now? If on 110 that 220 is huge compared to what my 363 ran. 0Ft of elevation, 40.5mm Kehein, Shearer OOF, VF3 I was running below a 170 main I think.

You run alky through the Smart Carb?

Rupp I did not, this is a 110 motor that Matt told me when I had the pipe built would take a huge jet the volume and length of pipe is huge for an inframe.

Saber569r · « **Reply #6 on:** January 04, 2016, 10:39:19 AM »

Quote from: Rupp250;62872

Are you running Alky? What carb do you have now? If on 110 that 220 is huge compared to what my 363 ran. 0Ft of elevation, 40.5mm Kehein, Shearer OOF, VF3 I was running below a 170 main I think.

You run alky through the Smart Carb?

I ran vp 110, 220 main still felt lean but ran great, Its a brand new 40.5 from Eddie.

Rupp250 · « **Reply #7 on:** January 04, 2016, 12:28:44 PM »

Saber, what does the plug look like?

Saber569r · « **Reply #8 on:** January 04, 2016, 12:44:23 PM »

A littltle white but never ran over 180 degrees.

Piediddy · « **Reply #9 on:** January 04, 2016, 01:15:11 PM »

If it's just a drag bike I'd run a Lectron. Call Dennis Packard and have him set one up for you with the big bowl

kb250r · « **Reply #10 on:** January 04, 2016, 06:26:36 PM »

Hills and straight drags...get a Alky dome,call Packard for lectron and put another 20 horses on that bad boy!!!!!��

Saber569r · « **Reply #11 on:** January 04, 2016, 08:25:07 PM »

Quote from: kb250r;62893

Hills and straight drags...get a Alky dome,call Packard for lectron and put another 20 horses on that bad boy!!!!!��

Been thinking of having Pete cut me one. Just can't get alky up here. Only place to get is a hour and a half away. Theirs a vp outlet in Phoenix.

Morse250r · « **Reply #12 on:** January 04, 2016, 08:57:31 PM »

Check local race engine shops for cars for alky too. I ran a 44 and a 48 lectron on my pro x on alky
On gas 40.5 and yes 168 and below on the jets shearer pipe

kb250r · « **Reply #13 on:** January 04, 2016, 10:19:59 PM »

A hide a way spot that people over look is a cart shop or go cart racing shop the keep tons of Alky!!!!

Jerry Hall · « **Reply #14 on:** January 05, 2016, 12:07:44 AM »

Quote from: Saber569r;62908

Been thinking of having Pete cut me one. Just can't get alky up here. Only place to get is a hour and a half away. Theirs a vp outlet in Phoenix.

There should be some guys in Flagstaff that have sprint cars or midgets that have drums of methanol or can tell you where they get theirs.