TRX250r.org
« previous next »
Pages: [1] 2   Go Down

Author Topic: Kicker shaft  (Read 5596 times)

Offline croat1

Kicker shaft
« on: January 21, 2021, 09:18:09 AM »
The early 85 atc250r engines had a shorter kicker shaft that caused the kicker to rub the clutch cover.  The change  to a longer shaft was changed sometime during production (1985).  Unfortunately I do not know at what exact serial number the change occurred.

Joe
« Last Edit: January 23, 2021, 06:07:20 PM by croat1 »
Logged
A few Laegers
1987 oem
2025 Yamaha Raptor 700R
Mission: Back to Basics.  On the trail or dune

Offline Braaaping247

Re: Kicker shaft
« Reply #1 on: January 23, 2021, 04:43:48 AM »
Logged

Offline Hawaiiysr

Re: Kicker shaft
« Reply #2 on: January 23, 2021, 05:46:16 PM »
Great info! now im curious and want to see what I have. Honda gave .9 seams generous
Logged

Offline croat1

Re: Kicker shaft
« Reply #3 on: January 25, 2021, 03:40:09 AM »
Logged
A few Laegers
1987 oem
2025 Yamaha Raptor 700R
Mission: Back to Basics.  On the trail or dune

Offline croat1

Re: Kicker shaft
« Reply #4 on: March 09, 2021, 12:21:54 AM »
This is not what we want to happen.

Logged
A few Laegers
1987 oem
2025 Yamaha Raptor 700R
Mission: Back to Basics.  On the trail or dune

Offline evaneyeball

Re: Kicker shaft
« Reply #5 on: March 09, 2021, 12:47:04 PM »
Something else interesting is that somewhere between 86 and 89 they changed the cover also so that you don't have to run a collar on the shift shaft
Logged
LED built 86 trx 350 CEO
81 ATC250r
Zero finesse and alot of throttle

Offline The norm

Re: Kicker shaft
« Reply #6 on: March 09, 2021, 03:26:06 PM »
Quote from: evaneyeball on March 09, 2021, 12:47:04 PM
Something else interesting is that somewhere between 86 and 89 they changed the cover also so that you don't have to run a collar on the shift shaft

I believe that was in 1988. The changed the gear and cover.
Logged
1986 Trx250r-- Hybrid Engineering 391(Good bye super 310)
1986 Trx250r-- Hybrid Engineering  ported stock 86 cylinder
1986 Trx250r-- craigslist engine with unknown ported 89 cylinder.
1985 Atc250r-- Needs a lot of work (Super 310's new home)

Offline croat1

Re: Kicker shaft
« Reply #7 on: March 09, 2021, 09:13:03 PM »
“Early” 1985

Logged
A few Laegers
1987 oem
2025 Yamaha Raptor 700R
Mission: Back to Basics.  On the trail or dune

Offline croat1

Re: Kicker shaft
« Reply #8 on: March 09, 2021, 09:15:40 PM »
“Updated” 1985 and newer

Logged
A few Laegers
1987 oem
2025 Yamaha Raptor 700R
Mission: Back to Basics.  On the trail or dune

Offline Banshee330

Re: Kicker shaft
« Reply #9 on: March 14, 2021, 08:43:32 PM »
Are there any aftermarket company’s making the kick starter shaft?
Logged

Offline croat1

Re: Kicker shaft
« Reply #10 on: March 14, 2021, 09:02:42 PM »
Quote from: Banshee330 on March 14, 2021, 08:43:32 PM
Are there any aftermarket company’s making the kick starter shaft?


Not in oem length.  I believe a company called Direct Drive does or did make some longer ones to clear a lock up clutch cover.

Joe
Logged
A few Laegers
1987 oem
2025 Yamaha Raptor 700R
Mission: Back to Basics.  On the trail or dune

Offline Banshee330

Re: Kicker shaft
« Reply #11 on: March 16, 2021, 08:32:23 PM »
I found a used kicker shaft on eBay today for 14 bucks. Hope it works, I got a few spline teeth missing. Also the gear shifter shaft have teeth missing too. Seller said splines were good. Also said it was only for 86-87 model.After reading this I’ll measure the shaft length, hope for the best.
Logged

Offline broken1

Re: Kicker shaft
« Reply #12 on: March 17, 2021, 01:15:14 PM »
Quote from: Banshee330 on March 16, 2021, 08:32:23 PM
I found a used kicker shaft on eBay today for 14 bucks. Hope it works, I got a few spline teeth missing. Also the gear shifter shaft have teeth missing too. Seller said splines were good. Also said it was only for 86-87 model.After reading this I’ll measure the shaft length, hope for the best.

Pretty sure the 85-86 atc & 86-89 trx all have the same shift shaft
Logged

Offline hickwheeler

Re: Kicker shaft
« Reply #13 on: April 05, 2021, 04:43:45 AM »
Ya the early shafts don't clear a esr qc cover when I built the puma. I used take out parts on it. First time I went to kick it. It dug into the cover. Had to put a different style in
Logged
88 hybrid 431 puma
88 (BOF Build) stock motor and oem 89 plastics
More in the works

Offline The norm

Re: Kicker shaft
« Reply #14 on: April 05, 2021, 10:01:08 AM »
Man Gene I bet that was a great feeling on a new build!
Logged
1986 Trx250r-- Hybrid Engineering 391(Good bye super 310)
1986 Trx250r-- Hybrid Engineering  ported stock 86 cylinder
1986 Trx250r-- craigslist engine with unknown ported 89 cylinder.
1985 Atc250r-- Needs a lot of work (Super 310's new home)
Pages: [1] 2   Go Up
« previous next »
 

Sitemap 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38